
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X110-20B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 110mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X110-20B is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 110 mm stroke by up to 20 mm on site, giving a usable 90-110 mm range. The B code gives a male rod thread on the 25 mm rod, and the port size is 1/4".
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this heavy-thrust cylinder still fits presses, gantries and clamping fixtures where a full-length body would not. A fixed TPU bumper at each end absorbs end-of-stroke energy, and the optional -S magnet enables CMSE / DMSE switches.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X110-20B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 110 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
The 90-110 mm adjustable window lets one cylinder serve several fixture heights on a CNC fixture plate, with FA flange mounting and the male-threaded rod taking a Y knuckle.
The stop screw only shortens the extend stroke within the ordered 20 mm window and is a mechanical end stop, not a mid-stroke lock - on air loss the piston still drifts, so add a separate holding valve if the load must stay put. Mount with FA flange or LB foot on the ISO 21287 face, add I or Y rod knuckles for the male-threaded rod, and order the -S code if you need CMSE / DMSE position sensing.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
Push is 6135.9 N and pull is 5890.5 N at 0.5 MPa; at 0.7 MPa push reaches 8590.3 N, and the theoretical maximum is 1251.4 kgf at 1.0 MPa. The -20 code is a 20 mm adjustment window: an external stop screw shortens the 110 mm extend stroke on site, so the working range is 90-110 mm. It is a mechanical end stop only - it never holds a load on air loss. Operating pressure is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, and the port is 1/4" PT.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this 125 mm bore fits tight fixtures that exclude full-length bodies. It has a hard-anodized aluminium body, an S45C hard-chrome 25 mm rod, and fixed TPU bumpers at both ends. Position sensing requires the optional -S magnet code; this model has no magnet fitted, so CMSE or DMSE switches can only be used if you order the -S version.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.