
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X110-50B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 110mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X110-50B is a double acting ISO 21287 compact cylinder with a 125 mm bore and a 110 mm stroke that an external stop screw trims on site by up to 50 mm, giving a usable extend range of 60-110 mm. At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N, rising to 8590.3 N on the extend stroke at 0.7 MPa. Its short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this heavy-force class still fits presses and fixtures where a full-length profile cylinder will not.
The hard-anodized aluminium body carries a 25 mm S45C hard-chrome rod with a male thread (B code), and a fixed TPU bumper at each end absorbs end-of-stroke energy. Note that the stop screw is a mechanical end stop only: on air loss the piston still drifts, so it never holds a load in position.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X110-50B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 110 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Pressing bearings into housings on an automotive line, where the 60-110 mm extend range lets the tooling team dial in the final stop after die trials.
Transferring loaded pallets between conveyors, where the short ISO 21287 body slots into the transfer frame and the male-thread rod takes a custom pusher plate.
If the task needs under 3927 N at 0.5 MPa, the ACEJ100 saves space and air. The 50 mm window suits dies and nests whose stop position is finalized late; order the -S code if CMSE / DMSE switches are wanted, since this model ships without a magnet. FA flange or LB foot mounting bolts to the ISO 21287 face, and PT ports take 1/4" fittings.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
Push is 6135.9 N and pull 5890.5 N at 0.5 MPa; at 0.7 MPa push reaches 8590.3 N, and the theoretical maximum is 1251.4 kgf at 1.0 MPa. The -50 code is a 50 mm adjustment window: an external stop screw shortens the 110 mm extend stroke on site, so the usable range is 60-110 mm. It shortens the stroke only and never lengthens it past the ordered value.
The hard-anodized aluminium body is an ISO 21287 compact design, about 50% shorter in mounting length than an ISO 15552 profile cylinder, with a fixed TPU bumper at each end and FA flange or LB foot options. Position sensing requires the optional -S magnet, which enables CMSE / DMSE switches; this model, ordered without -S, carries no magnet and accepts no sensors. Operating spec: 0.15-1.0 MPa (22-145 psi), 30-500 mm/s, -20 to +70 C.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.