
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X125-30B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 125mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
A heavy-duty double acting compact cylinder built to ISO 21287, the ACEJ125X125-30B pairs a 125 mm bore with a 125 mm stroke and a male-threaded 25 mm rod (the B code). At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N, rising to 8590.3 N at 0.7 MPa, with a theoretical peak of 1251.4 kgf at 1.0 MPa. The external stop screw trims the extend stroke anywhere within the ordered 30 mm window, so the working range is 95-125 mm, set on site with a screwdriver rather than a new order.
The hard-anodized aluminium body with an S45C hard-chrome rod saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters when a 125 mm bore has to fit inside a press frame or weld fixture. A fixed TPU bumper absorbs end-of-stroke shock at both ends, and speeds of 30-500 mm/s cover 0.15-1.0 MPa (22-145 psi) circuits.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X125-30B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 125 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
In a car-body weld cell, the short ISO 21287 body fits where an ISO 15552 profile cylinder would foul the fixture frame, delivering 6135.9 N at 0.5 MPa to hold panels through the gun cycle.
On a warehouse pallet-dispensing gate, the cylinder swings a heavy gate arm through the 125 mm stroke at 30-500 mm/s, with the male rod thread bolting straight to the existing linkage arm.
Remember the stop screw shortens the extend stroke only and is not a mid-stroke lock: on air loss the piston still drifts, so add a separate holding valve for suspended loads. Mount via FA flange or LB foot on the ISO 21287 face, choose the male rod thread (B) already fitted here, and if position feedback is needed later, order the -S variant to enable CMSE / DMSE switches - this unit has no magnet fitted.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push is 8590.3 N (pull 8246.7 N); theoretical maximum is 1251.4 kgf at 1.0 MPa. The -30 code sets a 30 mm adjustment window: an external stop screw shortens the 125 mm extend stroke to any value from 95 to 125 mm. It is a mechanical end stop only - it never holds a load if air is lost. Operating range is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, air filtered to 40 um.
It is an ISO 21287 compact cylinder: hard-anodized aluminium body, S45C hard-chrome-plated 25 mm rod, threaded aluminium covers, and a fixed TPU bumper at each end to absorb end-of-stroke impact. The body is about 50% shorter in mounting length than an ISO 15552 profile cylinder. FA flange and LB foot mountings bolt to the standard face, and the rod end is male thread (B code). Sensors are not possible on this unit as ordered - the magnet is the optional -S code, which enables CMSE / DMSE switches; PT ports are 1/4".
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.