
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X150-10B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 150mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X150-10B is a double acting ISO 21287 compact cylinder with a 125 mm bore and a 150 mm stroke that an external stop screw trims by up to 10 mm, giving a usable extend range of 140-150 mm. At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N, rising to 8590.3 N on the extend stroke at 0.7 MPa, with a theoretical maximum of 1251.4 kgf at 1.0 MPa. The male rod thread (B code) on the 25 mm hard-chrome S45C rod bolts straight to standard tooling plates.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this 125 mm force class fits heavy presses and clamping rigs where a full-length profile cylinder will not. Operating pressure is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, and fixed TPU bumpers absorb end-of-stroke energy. FA flange and LB foot mounts plus I/Y rod knuckles bolt to the ISO 21287 face.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X150-10B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Male rod thread and I/Y knuckles take up mould misalignment while 6135.9 N at 0.5 MPa holds clamp rings shut on large plastic injection tooling.
If your fixture needs a shorter trim range, the -NN window is also offered in 20/30/40/50/75/100 mm variants of the same cylinder. Note that the stop screw is a mechanical end stop only: on air loss the piston drifts, so it is not a load-holding lock. This unit has no magnet; order the -S code if you need CMSE / DMSE switch position sensing, and add FA flange or LB foot mounting to match your fixture.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push rises to 8590.3 N (pull 8246.7 N), and the theoretical maximum is 1251.4 kgf at 1.0 MPa. The -10 code is a 10 mm adjustment window: an external stop screw shortens the 150 mm extend stroke on site, so the usable range is 140-150 mm. It cannot lengthen the stroke past 150 mm, and the stop is not a mid-stroke lock - on air loss the piston still drifts.
The hard-anodized aluminium body with a 25 mm hard-chrome S45C rod is an ISO 21287 compact design about 50% shorter in mounting length than an ISO 15552 profile cylinder, with fixed TPU bumpers at both ends, 1/4" PT ports, 0.15-1.0 MPa (22-145 psi) operation and 30-500 mm/s speed. This model has no magnet fitted; order the -S version to enable CMSE / DMSE reed or solid-state switches, and choose FA flange or LB foot mounting for your fixture.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.