
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X150-20B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 150mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
A heavy-duty double acting compact cylinder built to ISO 21287, the ACEJ125X150-20B pairs a 125 mm hard-anodized aluminium body with a 25 mm hard-chrome-plated S45C rod and a male rod thread (B code). At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N, rising to 8590.3 N on the extend stroke at 0.7 MPa. The -20 code adds an external stop screw that trims the extend stroke on site anywhere in a 20 mm window, so the usable range is 130-150 mm without changing the cylinder.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters when a 625 kg-class push force has to fit inside a press fixture or clamp gantry. Note that the stop screw is a mechanical end stop only: on air loss the piston still drifts, so it never holds a load. TPU bumpers at both ends absorb end-of-stroke shock, and the optional -S magnet enables CMSE / DMSE switches.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X150-20B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Clamps heavy pallets or die sets in machining and stamping cells; the short ISO 21287 body fits where a full-length profile cylinder cannot, and the 1/4" port keeps air supply adequate at speed.
If 150 mm of travel with a 20 mm trim window covers the job, this model fits; strokes up to 300 mm are standard for bore 125. Choose the B male rod thread (M16x2.0) for external rod couplings, add FA flange or LB foot mounting to bolt onto standard ISO 21287 fixtures, and order the -S code if CMSE / DMSE position sensing is needed.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push is 8590.3 N and pull 8246.7 N, with a theoretical maximum of 1251.4 kgf at 1.0 MPa. The -20 code means an external stop screw shortens the 150 mm extend stroke by up to 20 mm, giving a 130-150 mm working range. It runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C. The stop is an end stop, not a load lock.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, S45C hard-chrome rod, male rod thread and 1/4" ports, about 50% shorter in mounting length than an ISO 15552 profile cylinder. Fixed TPU bumpers at both ends absorb end-of-stroke energy. FA flange and LB foot mountings bolt to the standard face. Position sensing requires the optional -S magnet code; this model has no magnet, so CMSE / DMSE switches cannot be fitted unless -S is ordered.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.