
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X150-30B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 150mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X150-30B is a double acting ISO 21287 compact cylinder with a 125 mm bore and a 150 mm stroke that an external stop screw can trim anywhere in a 30 mm window, giving a usable extend range of 120-150 mm. At 0.5 MPa it pushes with 6135.9 N and pulls with 5890.5 N, rising to 8590.3 N on the extend stroke at 0.7 MPa. As a rule of thumb, plan on roughly 3680 N (about 375 kgf) of real work at 0.5 MPa instead of the full rating.
The hard-anodized aluminium body with an S45C hard-chrome-plated 25 mm rod saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this heavy-thrust size still fits presses, guarding and gantry frames built around tight envelopes. The male rod thread (B code) bolts straight into standard tooling, and the fixed TPU bumper at each end absorbs end-of-stroke impact. Running range is 0.15-1.0 MPa (22-145 psi) at 30-500 mm/s.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X150-30B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
A 125 mm bore driving a compaction plate into a scrap or packaging baler: 6135.9 N at 0.5 MPa handles dense material, and the 30 mm window lets the operator trim the 150 mm stroke to match the bin depth without re-plumbing.
Clamping loaded pallets on an automated guided cart where every millimetre of length counts - the short ISO 21287 body frees space for batteries, and the male rod thread picks up the clamp arm directly.
Pushing a heavy die slide or machine guard gate at 30-500 mm/s: the stop screw sets the exact open position between 120 and 150 mm, and LB foot mounting anchors the cylinder to the machine frame.
If the job needs under about 3900 N at 0.5 MPa, the 100 mm bore costs less in air and fixture space; if you need the full 1251.4 kgf theoretical class, this is the largest compact size available.
The stop screw is a mechanical end stop for the extend stroke only - it shortens travel within the 30 mm window and does not hold or brake a load if air is lost. Mount with FA flange or LB foot brackets on the ISO 21287 face, and add I or Y rod knuckles for side misalignment. This unit has no magnet; order the -S version if you later need CMSE / DMSE switch position feedback.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push rises to 8590.3 N, and the theoretical maximum is 1251.4 kgf at 1.0 MPa. The -30 code sets a 30 mm adjustment window: an external stop screw shortens the 150 mm extend stroke by up to 30 mm, so the working range is 120-150 mm. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, with a 1/4" PT port and a 25 mm male-threaded rod.
The hard-anodized aluminium ISO 21287 body is about 50% shorter in mounting length than an ISO 15552 profile cylinder, so a 125 mm bore fits where a full-length profile cylinder would not. A fixed TPU bumper at each end absorbs end-of-stroke shock. Mounting options include FA flange, LB foot, FTC brackets and I/Y rod knuckles. This model has no magnet fitted; the optional -S magnet enables CMSE / DMSE switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.