
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X150-50B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 150mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X150-50B is a double acting ISO 21287 compact cylinder with a 125 mm bore and a 150 mm stroke that an external stop screw trims by up to 50 mm, giving a usable extend range of 100-150 mm. At 0.5 MPa it pushes with 6135.9 N and pulls with 5890.5 N, rising to 8590.3 N at 0.7 MPa. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so heavy-duty clamping fits into presses and gantries where a full-length body will not.
The hard-anodized aluminium body carries a 25 mm S45C hard-chrome rod with male thread (B code), a fixed TPU bumper sits at both ends, and speed runs 30-500 mm/s over 0.15-1.0 MPa (22-145 psi). No magnet is fitted; order the -S code if CMSE / DMSE switches are needed later.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X150-50B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Trimming the 150 mm stroke between 100-150 mm lets one cylinder serve several die heights, with 6135.9 N at 0.5 MPa handling thick steel clamping in a short-body footprint.
The 25 mm male-thread rod drives heavy swing gates or furnace lids via a Y knuckle, with the stop screw setting exact open position per line.
If your load needs more than about 375 kg of working force, this is the bore to pick. The stop screw is a mechanical end stop for the extend stroke only - on air loss the piston still drifts, so add a separate valve or lock for load holding. FA flange or LB foot mounting bolts to the ISO 21287 face, and the male rod thread suits clevis-type Y knuckles. Remember the magnet is the optional -S code, not a default.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
Push is 6135.9 N and pull 5890.5 N at 0.5 MPa; at 0.7 MPa push reaches 8590.3 N, and theoretical maximum force is 1251.4 kgf at 1.0 MPa. The -50 code is a 50 mm adjustment window: an external stop screw shortens the 150 mm extend stroke on site, so the usable range is 100-150 mm. It cannot lengthen the stroke beyond 150 mm, and the stop is not a mid-stroke lock - on air loss the piston still drifts. Operating range is 0.15-1.0 MPa (22-145 psi) at 30-500 mm/s.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, threaded aluminium covers, a 25 mm S45C hard-chrome rod with male thread, and a fixed TPU bumper at each end that only decelerates at the ends of travel. The body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and FA flange or LB foot mounts bolt to the standard face. This unit has no magnet fitted; the optional -S code adds one so CMSE / DMSE switches can be mounted. Port is 1/4" (PT), and the maximum standard stroke for this bore is 300 mm.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.