
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X160-40B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 160mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X160-40B is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 160 mm stroke by up to 40 mm on site, giving a usable range of 120-160 mm. The male rod thread (B code) bolts straight into male-threaded tooling.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this 125 mm bore fits presses and gantries where a full-length body will not. The hard-anodized aluminium body carries an S45C hard-chrome rod, fixed TPU bumpers at both ends, and FA/LB mounting plus I/Y rod knuckles bolt to the standard face. The optional -S magnet enables CMSE / DMSE switches; without it no magnet is fitted.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X160-40B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 160 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Machining centres clamp aluminium V6 blocks and gearbox housings against fixtures; the male rod thread takes machined clamp links directly, and the short body tucks under machine guards.
Warehouse conveyor ends use the 160 mm stroke to kick heavy pallets and full totes off line; about 310 kg of vertical-load margin keeps the ejector running at 30-500 mm/s without bottoming out.
Go larger only if you need beyond 8590.3 N at 0.7 MPa, since 125 mm is the largest ACEJ bore. Remember the stop screw is a mechanical end stop for the extend stroke, not a mid-stroke lock - on air loss the piston still drifts, so add a separate holding valve for suspended loads. Specify the -S code if CMSE / DMSE position sensing is planned, and match FA flange or LB foot mounting to your fixture.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push is 8590.3 N and pull 8246.7 N, with a theoretical maximum of 1251.4 kgf at 1.0 MPa. The -40 code sets a 40 mm adjustment window: an external stop screw shortens the 160 mm extend stroke on site, so the working range is 120-160 mm. It runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), from -20 to +70 C at 30-500 mm/s, with a 1/4" PT port and 25 mm male-threaded rod.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this 125 mm bore fits where a full-length body cannot. A fixed TPU bumper at each end absorbs end-of-stroke energy. FA flange, LB foot and FTC brackets plus I/Y rod knuckles bolt to the standard mounting face. Position sensing needs the optional -S magnet ordered with the cylinder; only then can CMSE or DMSE switches be used - without -S there is no magnet fitted.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.