verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC ACEJ Series · ISO 21287 Compact Cylinder

Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X160-75B

The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X160-75B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 160mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.

  • BoreØ125 mm
  • Stroke160 mm
  • Port size1/4"
  • Acting typeDouble acting, double rod, adjustable stroke
  • Rod threadM16×2.0
  • CushionFixed TPU bumper (both ends)
$248.05 $268.48Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every ACEJ125 stroke, adjustment, mounting and version on one page All ACEJ125 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X160-75B

The ACEJ125X160-75B is a double acting ISO 21287 compact cylinder with a 125 mm bore and a 160 mm extend stroke that an external stop screw trims on site by up to 75 mm, giving a usable range of 85-160 mm. At 0.5 MPa it pushes with 6135.9 N and pulls with 5890.5 N, rising to 8590.3 N on the extend stroke at 0.7 MPa. The hard-anodized aluminium body with a 25 mm S45C hard-chrome-plated rod runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s, from -20 to +70 C.

Because the short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, this 160 mm stroke unit slots into heavy presses, clamping fixtures and gantries where a full-length body would not fit. A fixed TPU bumper at each end absorbs end-of-stroke energy, and the male rod thread (B code) bolts straight to standard tooling.

Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X160-75B Technical Specifications

ModelAirtac ACEJ125 Adjustable Compact Cylinder ACEJ125X160-75B
SeriesACEJ compact cylinder
StandardISO 21287
Bore sizeØ125 mm
Stroke160 mm
Acting typeDouble acting, double rod, adjustable stroke
Port size1/4"
Rod threadM16×2.0
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed TPU bumper (both ends)
Max standard strokeUp to 300 mm

Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.

Theoretical Output Force (Ø125mm)

PressureForce (both ways)
0.5 MPa5890 N
0.7 MPa8247 N
Max (@1.0 MPa)1201 kgf

ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).

Model Code: Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X160-75B

ACEJISO 21287 compact cylinder (adjustable-stroke).
125Bore size in mm.
×160Stroke length in mm.
-75Adjustable stroke window (mm the extend stroke can be shortened on site).
SOptional built-in magnet for CMSE / DMSE sensors (omit for no magnet).
BRod type: B = male thread; blank = female thread.

ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.

Where the Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X160-75B Is Used

forklift

Pallet press and baling stations

The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so a 160 mm stroke compaction ram fits inside tight guard envelopes on packaging lines.

Is the Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X160-75B the Right Cylinder?

If your press or clamp needs less than about 3700 N of working force, the 100 mm bore will do the same job in a smaller envelope. Remember the stop screw is a mechanical end stop for the extend stroke, not a mid-stroke lock, so the rod still drifts if air is lost. FA flange or LB foot mounting plus I/Y rod knuckles suit heavy fixtures, and if you need position feedback, order the -S variant so CMSE / DMSE switches can be fitted; this B-coded model has no magnet.

AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Short stroke fits the compact body
  • ✓ Port/thread type (PT / G)
  • ✓ Add -S if you need the magnet for sensors
  • ✓ Rod type (female / male B) & mount (FA/LB/CA)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Compact body: keep the stroke short and avoid side load on the rod.
  • check Do not dismantle the threaded front/back covers.
  • check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
  • check Installation by qualified personnel per AirTAC docs.

Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X160-75B FAQ

At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push is 8590.3 N and pull 8246.7 N, with a theoretical maximum of 1251.4 kgf at 1.0 MPa. The -75 code is a 75 mm adjustment window: an external stop screw shortens the 160 mm extend stroke on site to any length from 85 to 160 mm. It is a mechanical end stop only, so on air loss the piston still drifts. Speed range is 30-500 mm/s and the port is 1/4" PT.

It is an ISO 21287 compact cylinder: hard-anodized aluminium body, S45C hard-chrome-plated 25 mm rod, threaded aluminium covers and a fixed TPU bumper at both ends that decelerates the piston at stroke ends. The body is about 50% shorter in mounting length than an ISO 15552 profile cylinder. This model has a male rod thread and PT ports; FA flange, LB foot and I/Y knuckle accessories bolt to the standard face. The magnet is the optional -S code, so CMSE / DMSE switches can only be used if you order the -S variant.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X160-75B

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for ACEJ125X160-75B and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.