
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X175-10B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 175mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X175-10B is a double acting, adjustable-stroke compact cylinder built to the ISO 21287 short-body format. At 0.5 MPa it pushes with 6135.9 N and pulls with 5890.5 N, rising to 8590.3 N on the extend stroke at 0.7 MPa. The external stop screw trims the 175 mm extend stroke by up to 10 mm on site, giving a usable range of 165-175 mm without swapping the cylinder.
The 125 mm bore delivers a theoretical maximum of 1251.4 kgf at 1.0 MPa, yet the hard-anodized aluminium body is about 50% shorter than an ISO 15552 profile cylinder, so this force class fits presses and clamping fixtures where a full-length body will not. The male rod thread (B code) on the 25 mm rod bolts directly to your tooling, and the fixed TPU bumper at each end absorbs end-of-stroke shock. Speed range is 30-500 mm/s.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X175-10B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 175 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
With about 3682 N of practical working force at 0.5 MPa, the 125 mm bore clamps iron or aluminium castings securely in CNC fixtures, and the short ISO 21287 body fits inside tight machine envelopes.
The 25 mm hard-chrome rod and 6135.9 N extend force control the descent of heavy die carts or pallet assemblies, with the TPU bumper softening the end of each 165-175 mm stroke.
Size against the numbers: a 100 mm bore pushes 3927.0 N at 0.5 MPa, so step up to this 125 mm model when your load needs more than about 4000 N of working force; the next size does not exist in this series, so this is the top of the range. Remember the stop screw is a mechanical end stop for the extend stroke, not a mid-stroke lock - on air loss the piston still drifts, so add a separate holding valve for suspended loads. This unit has no magnet fitted; if you need CMSE or DMSE switch position feedback, order the -S variant. FA flange, LB foot and FTC brackets plus I/Y rod knuckles bolt straight to the ISO 21287 face.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push is 8590.3 N and pull 8246.7 N; theoretical maximum is 1251.4 kgf at 1.0 MPa. It runs double acting on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), temperature -20 to +70 C, speed 30-500 mm/s, with a 1/4" port and a 25 mm male-thread rod (B code).
An external stop screw shortens the 175 mm extend stroke by up to 10 mm, so the working range is 165-175 mm; it is a mechanical end stop, not a mid-stroke lock, and the rod still drifts if air is lost. This version has no magnet, so no sensor can be read from it - order the optional -S magnet code to enable CMSE or DMSE switches. Mounting options include FA flange and LB foot, and the body is about 50% shorter than an ISO 15552 profile cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.