
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X175-20B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 175mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
A double acting AirTAC compact cylinder built to ISO 21287, the ACEJ125X175-20B pairs a 125 mm bore with a 175 mm stroke and a male rod thread (B code). At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N, rising to 8590.3 N at 0.7 MPa, which puts it in the heaviest class of this series. The -20 code adds an external stop screw that trims the extend stroke anywhere from 155 to 175 mm on site, so one cylinder can be tuned to several jig positions without reordering.
The hard-anodized aluminium body with an S45C hard-chrome rod keeps the short ISO 21287 footprint, saving about 50% of the mounting length of an ISO 15552 profile cylinder - useful in heavy presses and gantries where every millimetre counts. Operating range is 0.15-1.0 MPa (22-145 psi) with speeds of 30-500 mm/s and a fixed TPU bumper at both ends.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X175-20B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 175 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
The male rod thread (B code) accepts I or Y knuckles for core-pull mechanisms on large moulds, where the adjustable stop sets the exact retract-to-extend travel between 155 and 175 mm.
At this bore size there is no larger ACEJ option, so if 6135.9 N at 0.5 MPa is marginal for the job, step up to a different cylinder family or lower the working pressure margin. A 100 mm bore pushes 3927.0 N at 0.5 MPa if the load turns out lighter than expected. Remember the stop screw is a mechanical end stop only: it sets the extend position but does not hold a load if air is lost. FA flange or LB foot mounting bolts to the standard ISO 21287 face, and the male rod thread suits rod knuckles such as the I or Y types. If position feedback is needed later, order the -S variant - this model has no magnet, so CMSE / DMSE switches cannot be fitted.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push is 8590.3 N and pull 8246.7 N, with a theoretical maximum of 1251.4 kgf at 1.0 MPa. The -20 code is a 20 mm adjustment window: an external stop screw shortens the 175 mm extend stroke by up to 20 mm, giving a usable range of 155-175 mm. It is a mechanical end stop for the extend direction only - it does not lock or hold the load if air pressure is lost. Operating pressure is 0.15-1.0 MPa (22-145 psi) and speed is 30-500 mm/s.
The ISO 21287 compact body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a hard-anodized aluminium body, S45C hard-chrome plated 25 mm rod and a fixed TPU bumper at each end that decelerates the piston at end of stroke. FA flange and LB foot mounts bolt to the standard ISO 21287 face. This model has no magnet fitted; the optional -S version carries the magnet so CMSE / DMSE switches can sense piston position. The port is 1/4" (PT) and the rod end is male thread.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.