
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X175-30B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 175mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X175-30B is a double acting, adjustable-stroke compact cylinder built to ISO 21287. Its 125 mm bore delivers 6135.9 N on the push stroke and 5890.5 N on the pull stroke at 0.5 MPa, rising to 8590.3 N at 0.7 MPa, with a theoretical peak of 1251.4 kgf at 1.0 MPa. An external stop screw trims the 175 mm extend stroke by up to 30 mm on site, giving a usable range of 145-175 mm without changing the cylinder.
The hard-anodized aluminium body with an S45C hard-chrome plated 25 mm rod shrugs off wear in heavy-duty jigs and presses, and the short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder - useful when a 300 mm-class press force must fit inside a guarded machine frame. The rod ends in a male thread (B code), the ports are 1/4", and speed runs 30-500 mm/s at 0.15-1.0 MPa (22-145 psi).
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X175-30B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 175 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Pressing bushings into aluminium housings on an assembly line: the compact body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so the press head fits under a low gantry, while 3680 N of usable force at 0.5 MPa covers the job with margin.
If your clamp or press needs less than about 3900 N, the 100 mm saves space; if it needs more, step up to a different series. Remember the stop screw only shortens the extend stroke within the 30 mm window and drifts on air loss - it is not a mid-stroke lock. For position feedback, order the optional -S magnet so CMSE / DMSE switches can be fitted; this model without the S code carries no magnet. FA flange or LB foot mounts bolt to the standard ISO 21287 face, and PT ports are standard (G on request).
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push rises to 8590.3 N, and the theoretical maximum is 1251.4 kgf at 1.0 MPa. The -30 code sets a 30 mm adjustment window: an external stop screw shortens the 175 mm extend stroke by up to 30 mm, so the working range is 145-175 mm. The screw is a mechanical end stop only - on air loss the piston still drifts, so it never holds a load. Speed is 30-500 mm/s at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi).
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, a hard-chrome plated S45C 25 mm rod and threaded aluminium covers, with a fixed TPU bumper at each end to absorb end-of-stroke energy. Mounting is via the standard ISO 21287 face - FA flange or LB foot - plus I/Y rod knuckles. Sensors are possible only with the optional -S magnet code: order ACEJ125X175-30BS and CMSE / DMSE switches can be slid into the body slots. Without the -S code there is no magnet and no sensing. This unit has a male rod thread and 1/4" PT ports; the maximum standard stroke for bore 125 is 300 mm.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.