verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC ACEJ Series · ISO 21287 Compact Cylinder

Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X175-50B

The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X175-50B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 175mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.

  • BoreØ125 mm
  • Stroke175 mm
  • Port size1/4"
  • Acting typeDouble acting, double rod, adjustable stroke
  • Rod threadM16×2.0
  • CushionFixed TPU bumper (both ends)
$254.59 $275.46Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every ACEJ125 stroke, adjustment, mounting and version on one page All ACEJ125 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X175-50B

A double acting ISO 21287 compact cylinder with a 125 mm bore and a 175 mm stroke, the ACEJ125X175-50B pushes with 6135.9 N and pulls with 5890.5 N at 0.5 MPa, rising to 8590.3 N on the extend stroke at 0.7 MPa. The -50 code gives a 50 mm adjustment window: an external stop screw trims the extend stroke anywhere in the 125-175 mm range, so one cylinder covers several fixture positions. The male rod thread (B code) suits external rod attachments.

The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters when a 175 mm stroke must fit inside a press frame or guard. A fixed TPU bumper at each end absorbs end-of-stroke impact, and the hard-anodized aluminium body with a hard-chrome S45C rod runs at 30-500 mm/s on air filtered to 40 um.

Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X175-50B Technical Specifications

ModelAirtac ACEJ125 Adjustable Compact Cylinder ACEJ125X175-50B
SeriesACEJ compact cylinder
StandardISO 21287
Bore sizeØ125 mm
Stroke175 mm
Acting typeDouble acting, double rod, adjustable stroke
Port size1/4"
Rod threadM16×2.0
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed TPU bumper (both ends)
Max standard strokeUp to 300 mm

Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.

Theoretical Output Force (Ø125mm)

PressureForce (both ways)
0.5 MPa5890 N
0.7 MPa8247 N
Max (@1.0 MPa)1201 kgf

ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).

Model Code: Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X175-50B

ACEJISO 21287 compact cylinder (adjustable-stroke).
125Bore size in mm.
×175Stroke length in mm.
-50Adjustable stroke window (mm the extend stroke can be shortened on site).
SOptional built-in magnet for CMSE / DMSE sensors (omit for no magnet).
BRod type: B = male thread; blank = female thread.

ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.

Where the Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X175-50B Is Used

precision_manufacturing

Heavy press and forming fixtures

The 8590.3 N extend force at 0.7 MPa and the 125-175 mm adjustable window let one cylinder serve several die heights on a stamping or riveting fixture without changing hardware.

factory

Clamping large weldments

With about 3680 N of practical holding force at 0.5 MPa, the 125 mm bore clamps thick steel plate or fabricated frames in machining and welding jigs, and the male rod thread accepts custom clamp levers.

Is the Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X175-50B the Right Cylinder?

If your load needs more than about 3680 N of working force (roughly 60% of the 6135.9 N rating), the 125 mm bore is the right choice. Note that the stop screw is a mechanical end stop only - on air loss the piston still drifts, so add a separate valve or lock if the load must be held. FA flange or LB foot mounting bolts to the ISO 21287 face, and PT ports take standard fittings. If position feedback is needed later, order the -S variant with the optional magnet for CMSE / DMSE switches; this model has no magnet fitted.

AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Short stroke fits the compact body
  • ✓ Port/thread type (PT / G)
  • ✓ Add -S if you need the magnet for sensors
  • ✓ Rod type (female / male B) & mount (FA/LB/CA)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Compact body: keep the stroke short and avoid side load on the rod.
  • check Do not dismantle the threaded front/back covers.
  • check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
  • check Installation by qualified personnel per AirTAC docs.

Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X175-50B FAQ

The -50 code means an external stop screw can shorten the 175 mm extend stroke by up to 50 mm, giving a usable range of 125-175 mm. It shortens the stroke only - it never extends past 175 mm and it is not a mid-stroke lock, so the piston still drifts if air is lost.

The ISO 21287 compact body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a fixed TPU bumper at each end to absorb end-of-stroke impact. This model has no magnet fitted; the optional -S magnet enables CMSE / DMSE switches for position sensing. FA flange and LB foot mounts bolt to the standard ISO 21287 face, the rod end is male thread (B code), the port is 1/4" PT, and the cylinder runs at 0.15-1.0 MPa (22-145 psi) and 30-500 mm/s.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X175-50B

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for ACEJ125X175-50B and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.