
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X175-75B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 175mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X175-75B is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 175 mm stroke by up to 75 mm on site, giving a usable range of 100-175 mm. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this force class fits heavy presses and clamping gantries that cannot spare the envelope.
Construction is a hard-anodized aluminium body with a 25 mm S45C hard-chrome-plated rod, a male rod thread (B code) and a 1/4" PT port. A fixed TPU bumper at each end absorbs end-of-stroke energy, and the two-way piston seal stores grease for long service. The magnet is not fitted on this model; order the optional -S code if CMSE / DMSE switch position sensing is needed later.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X175-75B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 175 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Machining fixtures for engine blocks and gearbox castings use the 100-175 mm adjustable range to clamp thick sections, with the compact body fitting inside the fixture footprint.
Conveyor stoppers and lift-and-locate gates for full pallets exploit the roughly 313 kg vertical-lift equivalent, with LB foot mounting on the conveyor frame.
Plan on about 3681.5 N (roughly 375 kgf) of usable work at 0.5 MPa rather than the full rating. The stop screw is a mechanical end stop only - on air loss the piston still drifts, so do not rely on it to hold a load mid-stroke. FA flange or LB foot mounting bolts to the ISO 21287 face, and the male rod thread suits rod knuckles such as the I or Y type.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa it pushes 8590.3 N and pulls 8246.7 N; theoretical maximum is 1251.4 kgf at 1.0 MPa. The -75 code is a 75 mm adjustment window: an external stop screw shortens the 175 mm extend stroke by up to 75 mm, so the working range is 100-175 mm. It cannot lengthen the stroke beyond 175 mm, and the stop is not a mid-stroke lock - on air loss the piston still drifts. Operating pressure is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, with a fixed TPU bumper at both ends.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters when a 125 mm bore must fit inside a guard or jig. FA flange, LB foot and FTC brackets plus I and Y rod knuckles bolt to the standard face. This model has no magnet fitted; the optional -S code adds one so CMSE / DMSE reed or solid-state switches can sense position. The 1/4" PT port and male rod thread are standard on this B-code version.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.