verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC ACEJ Series · ISO 21287 Compact Cylinder

Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X20-20B

The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X20-20B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 20mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.

  • BoreØ125 mm
  • Stroke20 mm
  • Port size1/4"
  • Acting typeDouble acting, double rod, adjustable stroke
  • Rod threadM16×2.0
  • CushionFixed TPU bumper (both ends)
$186.60 $202.88Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every ACEJ125 stroke, adjustment, mounting and version on one page All ACEJ125 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X20-20B

The ACEJ125X20-20B is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 20 mm stroke anywhere from 0 to 20 mm on site, no disassembly needed. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this force class fits into presses and clamping fixtures where a full-length profile body will not go.

The hard-anodized aluminium body carries a 25 mm S45C hard-chrome-plated rod with a male thread (the B code), and a fixed TPU bumper at each end absorbs end-of-stroke energy. Operating range is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, temperature -20 to +70 C. Note that this unit has no magnet fitted; order the -S version if CMSE / DMSE switch position sensing is needed later.

Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X20-20B Technical Specifications

ModelAirtac ACEJ125 Adjustable Compact Cylinder ACEJ125X20-20B
SeriesACEJ compact cylinder
StandardISO 21287
Bore sizeØ125 mm
Stroke20 mm
Acting typeDouble acting, double rod, adjustable stroke
Port size1/4"
Rod threadM16×2.0
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed TPU bumper (both ends)
Max standard strokeUp to 300 mm

Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.

Theoretical Output Force (Ø125mm)

PressureForce (both ways)
0.5 MPa5890 N
0.7 MPa8247 N
Max (@1.0 MPa)1201 kgf

ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).

Model Code: Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X20-20B

ACEJISO 21287 compact cylinder (adjustable-stroke).
125Bore size in mm.
×20Stroke length in mm.
-20Adjustable stroke window (mm the extend stroke can be shortened on site).
SOptional built-in magnet for CMSE / DMSE sensors (omit for no magnet).
BRod type: B = male thread; blank = female thread.

ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.

Where the Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X20-20B Is Used

factory

Heavy clamp fixture on a machining line

Clamping a cast-iron housing during milling: about 3682 N of usable clamp force at 0.5 MPa holds the part, and the FA flange bolts straight onto the fixture plate.

vertical_align_bottom

Lift-assist pusher under a conveyor

Raising a 300 kg pallet stop or gate vertically with margin, using the 125 mm bore's pull force of 5890.5 N at 0.5 MPa in a space too short for a profile cylinder.

Is the Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X20-20B the Right Cylinder?

Size by force: the next bore down, 100 mm, pushes 3927.0 N at 0.5 MPa, while this 125 mm bore gives 6135.9 N - choose it when a clamp or press head needs the extra margin in a short body. The 20 mm adjustment window suits fixed-height stamping, marking or swaging stations where the final stroke is tuned during commissioning. Remember the stop screw only shortens the extend stroke and is a mechanical end stop, not a mid-stroke lock: on air loss the piston still drifts, so add a separate holding valve for suspended loads. Mount with FA flange or LB foot on the ISO 21287 face, and specify the -S magnet code at order time if CMSE / DMSE switches will be used.

AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Short stroke fits the compact body
  • ✓ Port/thread type (PT / G)
  • ✓ Add -S if you need the magnet for sensors
  • ✓ Rod type (female / male B) & mount (FA/LB/CA)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Compact body: keep the stroke short and avoid side load on the rod.
  • check Do not dismantle the threaded front/back covers.
  • check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
  • check Installation by qualified personnel per AirTAC docs.

Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X20-20B FAQ

At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push rises to 8590.3 N and pull to 8246.7 N; theoretical maximum is 1251.4 kgf at 1.0 MPa. The 20 mm extend stroke is trimmed by an external stop screw anywhere in the 0-20 mm window, and the rod is 25 mm with a male thread on a 1/4" PT air port.

It is an ISO 21287 compact cylinder: hard-anodized aluminium body with an S45C hard-chrome rod, threaded aluminium covers and a fixed TPU bumper at both ends, about 50% shorter in mounting length than an ISO 15552 profile cylinder. This version has no magnet, so no switch can be read; order the -S magnet code to enable CMSE / DMSE reed or solid-state switches. FA flange and LB foot mountings bolt to the standard face.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X20-20B

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for ACEJ125X20-20B and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.