
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X200-20B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 200mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
A double acting ISO 21287 compact cylinder with an adjustable extend stroke, the ACEJ125X200-20B pairs a 125 mm bore with a 200 mm stroke and a 25 mm male-threaded rod (the B code). At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N, rising to 8590.3 N on the extend stroke at 0.7 MPa - enough to press, clamp or lift heavy tooling. The external stop screw trims the extend stroke by up to 20 mm on site, giving a usable range of 180-200 mm without changing hardware.
The hard-anodized aluminium body with an S45C hard-chrome rod saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this force class fits short jigs and press frames. The theoretical maximum is 1251.4 kgf at 1.0 MPa. FA flange and LB foot mounts bolt to the standard ISO 21287 face; the optional -S magnet enables CMSE / DMSE switches, and without -S no magnet is fitted.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X200-20B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, letting high-force clamps fit inside guarded CNC loading gantries.
If the job needs only 3000-4000 N, the 100 mm bore saves air and cost; for presses, heavy clamps or lifting above 5000 N, stay at 125 mm. Remember the stop screw is a mechanical end stop for the extend stroke, not a mid-stroke lock - the rod still drifts if air is lost. Specify the -S code if CMSE / DMSE position switches are planned, and choose FA flange or LB foot mounting to suit the fixture.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push is 8590.3 N and pull 8246.7 N; theoretical maximum is 1251.4 kgf at 1.0 MPa. The -20 code gives a 20 mm adjustment window: an external stop screw shortens the 200 mm extend stroke to any setting from 180 to 200 mm. It is a mechanical end stop only - it never holds a load if air pressure drops. Operating range is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, air filtered to 40 um.
The ISO 21287 compact body with hard-anodized aluminium construction saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a fixed TPU bumper at both ends absorbing end-of-stroke energy. Position sensing requires the optional -S magnet code - this model has no magnet, so CMSE / DMSE switches cannot be fitted unless -S is ordered. FA flange and LB foot mounts plus I/Y rod knuckles bolt to the standard ISO 21287 face; the B code gives a male 25 mm rod thread and the 1/4" PT port matches the 125 mm bore.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.