verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC ACEJ Series · ISO 21287 Compact Cylinder

Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X200-30B

The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X200-30B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 200mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.

  • BoreØ125 mm
  • Stroke200 mm
  • Port size1/4"
  • Acting typeDouble acting, double rod, adjustable stroke
  • Rod threadM16×2.0
  • CushionFixed TPU bumper (both ends)
$262.68 $284.10Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every ACEJ125 stroke, adjustment, mounting and version on one page All ACEJ125 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X200-30B

The ACEJ125X200-30B is a double acting, adjustable-stroke compact cylinder built to ISO 21287, with a 125 mm bore and 200 mm stroke. An external stop screw trims the extend stroke anywhere within the ordered 30 mm window, giving a usable range of 170-200 mm without changing hardware. At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push rises to 8590.3 N, with a theoretical maximum of 1251.4 kgf at 1.0 MPa. The hard-anodized aluminium body carries a 25 mm S45C hard-chrome-plated rod, and the male rod thread (B code) bolts straight to your tooling.

The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this heavy-force class still fits guarded presses and gantries where a full-length body will not. A fixed TPU bumper at each end absorbs end-of-stroke energy, and the 1/4" PT ports suit bores 80 mm and up. Note that the stop screw is a mechanical end stop only: on air loss the piston drifts, so it never holds a load mid-stroke.

Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X200-30B Technical Specifications

ModelAirtac ACEJ125 Adjustable Compact Cylinder ACEJ125X200-30B
SeriesACEJ compact cylinder
StandardISO 21287
Bore sizeØ125 mm
Stroke200 mm
Acting typeDouble acting, double rod, adjustable stroke
Port size1/4"
Rod threadM16×2.0
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed TPU bumper (both ends)
Max standard strokeUp to 300 mm

Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.

Theoretical Output Force (Ø125mm)

PressureForce (both ways)
0.5 MPa5890 N
0.7 MPa8247 N
Max (@1.0 MPa)1201 kgf

ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).

Model Code: Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X200-30B

ACEJISO 21287 compact cylinder (adjustable-stroke).
125Bore size in mm.
×200Stroke length in mm.
-30Adjustable stroke window (mm the extend stroke can be shortened on site).
SOptional built-in magnet for CMSE / DMSE sensors (omit for no magnet).
BRod type: B = male thread; blank = female thread.

ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.

Where the Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X200-30B Is Used

precision_manufacturing

Gantry-mounted clamping on CNC lines

The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this force class fits inside tight machine-tool guards and gantry frames.

Is the Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X200-30B the Right Cylinder?

At this bore you are at the top of the ACEJ range. Check the pull figure too: 5890.5 N at 0.5 MPa on retraction, since rod-side area is smaller. This unit has no magnet fitted, so no CMSE or DMSE switch can be read from it; order the -S variant if position sensing is planned. FA flange and LB foot mountings plus I and Y rod knuckles bolt to the standard ISO 21287 face. Operating window is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, temperature -20 to +70 C with air filtered to 40 um.

AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Short stroke fits the compact body
  • ✓ Port/thread type (PT / G)
  • ✓ Add -S if you need the magnet for sensors
  • ✓ Rod type (female / male B) & mount (FA/LB/CA)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Compact body: keep the stroke short and avoid side load on the rod.
  • check Do not dismantle the threaded front/back covers.
  • check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
  • check Installation by qualified personnel per AirTAC docs.

Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X200-30B FAQ

At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push is 8590.3 N and pull 8246.7 N, with a theoretical maximum of 1251.4 kgf at 1.0 MPa. The -30 code is a 30 mm adjustment window: an external stop screw shortens the 200 mm extend stroke by up to 30 mm, so the usable range is 170-200 mm. It is double acting, runs 30-500 mm/s on 0.15-1.0 MPa (22-145 psi) air, and the stop is an end stop only, not a mid-stroke lock.

It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, 25 mm S45C hard-chrome-plated rod with male thread (B code), fixed TPU bumpers at both ends and 1/4" PT ports. The body is about 50% shorter in mounting length than an ISO 15552 profile cylinder. This model has no magnet, so no sensor can be mounted; order the -S version to enable CMSE or DMSE switches. FA flange, LB foot and I/Y rod knuckles fit the standard mounting face.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X200-30B

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for ACEJ125X200-30B and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.