
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X200-50B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 200mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
A double acting ISO 21287 compact cylinder, the ACEJ125X200-50B pairs a 125 mm bore with a 200 mm stroke and a male-threaded 25 mm rod. At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N, rising to 8590.3 N at 0.7 MPa, with a theoretical ceiling of 1251.4 kgf at 1.0 MPa. An external stop screw trims the extend stroke anywhere inside the ordered 50 mm window, so the working range is 150-200 mm, set on site with a screwdriver rather than a new order.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters when a 125 mm bore must fit inside a press frame or guard. The hard-anodized aluminium body carries a hard-chrome S45C rod, fixed TPU bumpers sit at both ends, and the optional -S magnet enables CMSE / DMSE switches - without that code there is no magnet fitted.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X200-50B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
In a fixture for welded frames or machine castings, the 150-200 mm adjustable clamp stroke holds heavy parts while the compact body fits between fixture rails where a full-length profile cylinder cannot.
If your press or clamp needs the full 6135.9 N class and the 150-200 mm adjustable range, this model fits. Remember the stop screw sets the extend end position only; it is not a mid-stroke lock, so on air loss the rod still drifts. Mount with FA flange or LB foot on the ISO 21287 face, add I or Y rod knuckles for side misalignment, and order the -S code if CMSE / DMSE position sensing is planned. Air supply: 0.15-1.0 MPa (22-145 psi), filtered to 40 um; speed range 30-500 mm/s.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push is 8590.3 N and pull 8246.7 N; theoretical maximum is 1251.4 kgf at 1.0 MPa. The -50 code is a 50 mm adjustment window: an external stop screw shortens the 200 mm extend stroke by up to 50 mm, giving a usable range of 150-200 mm. It is double acting, runs on 0.15-1.0 MPa (22-145 psi) air filtered to 40 um, at 30-500 mm/s, and the stop is an end stop only - it never holds a load if air is lost.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so a 125 mm bore fits where a full-length cylinder will not. A fixed TPU bumper at each end absorbs end-of-stroke impact. Position sensing requires the optional -S magnet code - this model has no magnet fitted, so no CMSE / DMSE switch can be read until -S is ordered. Mounting is via FA flange or LB foot on the standard ISO 21287 face, with I or Y rod knuckles available for the male-threaded rod. Port is 1/4" (PT); for outline dimensions, confirm from datasheet.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.