
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X225-10B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 225mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X225-10B is a double acting, adjustable-stroke compact cylinder built to ISO 21287. An external stop screw trims the 225 mm extend stroke by up to 10 mm on site, giving a usable range of 215-225 mm, and fixed TPU bumpers absorb end-of-stroke shock at both ends.
The hard-anodized aluminium body with an S45C hard-chrome-plated 25 mm rod runs at 30-500 mm/s on air filtered to 40 um, from 0.15-1.0 MPa (22-145 psi). The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this heavy-thrust class fits presses and gantries where full-length bodies will not. Note this model has no magnet fitted; order the optional -S code if CMSE / DMSE switch sensing is needed later.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X225-10B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 225 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
In robotic welding gantries the compact body, about 50% shorter in mounting length than an ISO 15552 profile cylinder, clamps thick chassis sections inside tight fixture frames at up to 8590.3 N at 0.7 MPa.
On injection moulding and die-cast lines, the male-threaded 25 mm rod drives heavy mould-change pushers through a 215-225 mm trimmed stroke, with LB foot mounting for rigid base fixing.
If your load needs less than about 5500 N, the 100 mm bore saves space and air; if 6135.9 N is marginal, confirm the 0.7 MPa figure of 8590.3 N or step up is not possible, so verify load carefully. The -10 window shortens the extend stroke only, from 225 mm down to 215 mm; it is a mechanical end stop, not a mid-stroke lock, so the rod can still drift on air loss. Male rod thread (B code) suits rod knuckles such as I and Y; FA flange and LB foot mount on the ISO 21287 face. No magnet is fitted on this code.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa it pushes 8590.3 N and pulls 8246.7 N, with a theoretical maximum of 1251.4 kgf at 1.0 MPa. The -10 code gives a 10 mm adjustment window: an external stop screw shortens the 225 mm extend stroke to as little as 215 mm. It runs double acting at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s, with a 1/4" port and male rod thread. The stop is an end stop only and does not hold a load if air is lost.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, threaded aluminium covers, a hard-chrome-plated S45C rod and fixed TPU bumpers at both ends that absorb end-of-stroke energy. Mounting options include FA flange and LB foot plus I and Y rod knuckles on the standard ISO 21287 face. This model has no magnet, so no CMSE or DMSE switch can be read on it; specify the optional -S magnet code at order time if sensing is required.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.