
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X225-20B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 225mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The -20 code adds an external stop screw that trims the extend stroke anywhere within a 20 mm window, so the usable extend range is 205-225 mm, set on site without disassembly. The B code specifies a male rod thread; ports are 1/4" PT.
The hard-anodized aluminium body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, which matters when a 6 kN-class actuator must fit inside a press fixture or machine guard. Fixed TPU bumpers absorb end-of-stroke shock at both ends, and the optional -S magnet enables CMSE / DMSE switches; without -S no magnet is fitted.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X225-20B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 225 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
A 225 mm stroke with 5890.5 N pull force swings heavy oven doors, furnace gates and machine guards, with the stop screw trimming the open position to match the frame.
Remember the stop screw is a mechanical end stop for the extend stroke, not a mid-stroke lock: on air loss the piston still drifts, so add a separate holding valve if the load must stay put. Mount with FA flange or LB foot on the ISO 21287 face, add I or Y rod knuckles for side misalignment, and order the -S code if CMSE / DMSE position switches are needed.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa the bore 125 cylinder pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push rises to 8590.3 N, and theoretical maximum force is 1251.4 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, air filtered to 40 um, and temperature -20 to +70 C. The extend stroke is 225 mm, trimmable by up to 20 mm via the external stop screw (205-225 mm usable).
An external stop screw shortens the extend stroke on site within the ordered 20 mm window; it is a mechanical end stop, not a load-holding brake, so the rod can drift if air is lost. Position sensing requires the optional -S magnet code: only with -S fitted can CMSE or DMSE switches ride the body slots. This unit (no S code) carries no magnet. Mounting uses FA flange or LB foot plus I/Y rod knuckles, and the male rod thread (B code) bolts directly to your tooling.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.