
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X225-30B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 225mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X225-30B is a double acting ISO 21287 compact cylinder with a 125 mm bore and a 225 mm stroke that an external stop screw trims on site by up to 30 mm, giving a usable extend range of 195-225 mm. At 0.5 MPa it pushes with 6135.9 N and pulls with 5890.5 N, rising to 8590.3 N on the extend stroke at 0.7 MPa, so it sits in the top force class of the ACEJ range. The male rod thread (B code) on the 25 mm rod bolts straight into standard tooling.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters when a 225 mm stroke must fit inside a press frame or a guarded gantry. The hard-anodized aluminium body carries a hard-chromed S45C rod, fixed TPU bumpers absorb end-of-stroke shock, and the optional -S magnet enables CMSE / DMSE switches if position sensing is added later.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X225-30B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 225 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
The male-threaded 25 mm rod with I or Y knuckles drives sliding furnace doors and machine guards, where the 195-225 mm adjustable range absorbs hinge wear and the fixed TPU bumpers soften each end stop.
If the machine needs a shorter trim range, the -10 to -100 window codes are available on the same bore. Note that the stop screw is a mechanical end stop for the extend stroke only, not a mid-stroke lock, so on air loss the piston still drifts and a separate holding valve is needed for suspended loads. Mount with FA flange or LB foot brackets, add I or Y rod knuckles for the male-threaded rod, and order the -S code only if CMSE / DMSE sensing is required.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
This 125 mm bore model pushes 6135.9 N and pulls 5890.5 N at 0.5 MPa, and pushes 8590.3 N (pull 8246.7 N) at 0.7 MPa, with a theoretical maximum of 1251.4 kgf at 1.0 MPa. The base stroke is 225 mm and the -30 code gives a 30 mm adjustment window, so the extend stroke can be trimmed anywhere from 195 to 225 mm with the external stop screw. It runs double acting on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, with a 1/4" PT port and a 25 mm male-threaded rod.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, using a hard-anodized aluminium barrel with threaded aluminium covers and a hard-chromed S45C piston rod. A fixed TPU bumper at each end absorbs end-of-stroke energy; it only decelerates the piston and never locks or holds a load. Mounting uses FA flange or LB foot brackets plus I/Y rod knuckles on the ISO 21287 face. The magnet is not fitted on this model: order the optional -S code to enable CMSE / DMSE reed or solid-state switches, and confirm outline dimensions from the datasheet before designing the envelope.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.