
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X225-40B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 225mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X225-40B is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: a 125 mm bore drives a 25 mm hard-chrome-plated S45C rod through a 225 mm stroke, and an external stop screw trims the extend stroke by up to 40 mm on site, giving a usable range of 185-225 mm. At 0.5 MPa it pushes with 6135.9 N and pulls with 5890.5 N, rising to 8590.3 N and 8246.7 N at 0.7 MPa.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this 125 mm force class fits presses and gantries where a full-length cylinder will not. The male rod thread (B code) bolts straight to standard tooling, and the fixed TPU bumper at each end absorbs end-of-stroke energy. Operating range is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X225-40B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 225 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so the 125 mm bore fits inside tight gantry beams and guarding where a full-length large-bore cylinder cannot.
The stop screw is a mechanical end stop for the extend stroke only, not a mid-stroke lock, so on air loss the piston still drifts; use a separate valve or lock for load holding. Mount with FA flange or LB foot, add I or Y rod knuckles on the male thread, and order the optional -S magnet if CMSE / DMSE switches are needed later - this unit has no magnet fitted.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push is 8590.3 N and pull 8246.7 N, with a theoretical maximum of 1251.4 kgf at 1.0 MPa. The -40 code is a 40 mm adjustment window: an external stop screw shortens the 225 mm extend stroke by up to 40 mm, so the usable range is 185-225 mm. It is double acting, runs at 30-500 mm/s on 0.15-1.0 MPa (22-145 psi) air filtered to 40 um, and the stop screw is an end stop only, not a load-holding brake.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, threaded aluminium covers, a 25 mm hard-chrome-plated S45C rod, 1/4" PT ports and a fixed TPU bumper at both ends - its short body saves about 50% of the mounting length of an ISO 15552 profile cylinder. This model has no magnet fitted, so no switch can be read; if you need end-position sensing, order the -S variant with the optional magnet and use CMSE or DMSE switches. Mounting options include FA flange and LB foot, with male-threaded rod ends ready for I or Y knuckles.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.