verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC ACEJ Series · ISO 21287 Compact Cylinder

Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X225-75B

The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X225-75B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 225mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.

  • BoreØ125 mm
  • Stroke225 mm
  • Port size1/4"
  • Acting typeDouble acting, double rod, adjustable stroke
  • Rod threadM16×2.0
  • CushionFixed TPU bumper (both ends)
$274.20 $296.40Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every ACEJ125 stroke, adjustment, mounting and version on one page All ACEJ125 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X225-75B

A heavy-thrust double acting compact cylinder built to ISO 21287, the ACEJ125X225-75B pairs a 125 mm bore with a 225 mm stroke and a male rod thread (B code). At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N, rising to 8590.3 N on the extend stroke at 0.7 MPa, with a theoretical ceiling of 1251.4 kgf at 1.0 MPa. The external stop screw trims the extend stroke anywhere within the ordered 75 mm window, giving a usable range of 150-225 mm without changing the valve program.

The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters when a 125 mm bore has to fit inside a press frame or gantry that was sized for a smaller machine. The hard-anodized aluminium body carries a 25 mm hard-chrome-plated S45C rod, fixed TPU bumpers absorb end-of-stroke shock at both ends, and speed spans 30-500 mm/s across 0.15-1.0 MPa (22-145 psi).

Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X225-75B Technical Specifications

ModelAirtac ACEJ125 Adjustable Compact Cylinder ACEJ125X225-75B
SeriesACEJ compact cylinder
StandardISO 21287
Bore sizeØ125 mm
Stroke225 mm
Acting typeDouble acting, double rod, adjustable stroke
Port size1/4"
Rod threadM16×2.0
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed TPU bumper (both ends)
Max standard strokeUp to 300 mm

Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.

Theoretical Output Force (Ø125mm)

PressureForce (both ways)
0.5 MPa5890 N
0.7 MPa8247 N
Max (@1.0 MPa)1201 kgf

ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).

Model Code: Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X225-75B

ACEJISO 21287 compact cylinder (adjustable-stroke).
125Bore size in mm.
×225Stroke length in mm.
-75Adjustable stroke window (mm the extend stroke can be shortened on site).
SOptional built-in magnet for CMSE / DMSE sensors (omit for no magnet).
BRod type: B = male thread; blank = female thread.

ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.

Where the Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X225-75B Is Used

forklift

Pallet clamp and gate actuation

With about 375 kg of vertical lift capability at a conservative margin, the 125 mm bore drives heavy clamp arms, lift gates and pallet stops in warehouse automation.

factory

Injection mold slide cores

The short ISO 21287 body slots into mold bases and machine guards where a full-length profile cylinder will not fit, while the 25 mm rod resists side loading in core-pull duty.

Is the Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X225-75B the Right Cylinder?

Remember the stop screw is a mechanical end stop for the extend stroke only - on air loss the piston drifts, so add a separate valve or lock if the load must be held mid-travel. Mount with FA flange or LB foot on the ISO 21287 face, and note this unit has no magnet: order the -S code if you later need CMSE / DMSE switch position feedback.

AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Short stroke fits the compact body
  • ✓ Port/thread type (PT / G)
  • ✓ Add -S if you need the magnet for sensors
  • ✓ Rod type (female / male B) & mount (FA/LB/CA)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Compact body: keep the stroke short and avoid side load on the rod.
  • check Do not dismantle the threaded front/back covers.
  • check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
  • check Installation by qualified personnel per AirTAC docs.

Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X225-75B FAQ

At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push rises to 8590.3 N, and the theoretical maximum is 1251.4 kgf at 1.0 MPa. The -75 code is a 75 mm adjustment window: an external stop screw shortens the 225 mm extend stroke on site, so the working range is 150-225 mm. It shortens the stroke only - it never extends past 225 mm, and it is an end stop, not a mid-stroke lock.

The ISO 21287 compact body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with FA flange and LB foot options on the standard face. Fixed TPU bumpers at both ends absorb end-of-stroke impact. This unit is supplied without a magnet; order the -S version to enable CMSE or DMSE reed or solid-state switches for end-of-stroke detection.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X225-75B

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for ACEJ125X225-75B and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.