
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X250-10B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 250mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X250-10B is a double acting ISO 21287 compact cylinder with an adjustable extend stroke. Its 125 mm bore delivers 6135.9 N on the push stroke and 5890.5 N on the pull stroke at 0.5 MPa, rising to 8590.3 N at 0.7 MPa, with a theoretical maximum of 1251.4 kgf at 1.0 MPa. The external stop screw trims the 250 mm extend stroke by up to 10 mm on site, so the working range is 240-250 mm without changing hardware.
The hard-anodized aluminium body with an S45C hard-chrome plated 25 mm rod runs at 0.15-1.0 MPa (22-145 psi) and 30-500 mm/s, with a fixed TPU bumper at each end. Because the short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, this heavy-force class still fits presses and gantries where a full-length profile cylinder cannot. The male rod thread (B code) bolts straight to standard tooling.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X250-10B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 250 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
FA flange mounting and the male rod thread anchor the cylinder to a milling or turning fixture, holding large castings with about 3680 N of usable clamping force.
The 250 mm stroke slides loaded pallets between stations, while the compact body fits the shallow guard envelope that a full-length ISO 15552 profile cylinder would overrun.
At this bore size nothing smaller comes close: a 100 mm bore pushes 3927.0 N at 0.5 MPa, so step up to this 125 mm unit when the load exceeds about 600 kg of push demand. There is no larger bore in the series, so if you need more than 6135.9 N at 0.5 MPa, parallel cylinders or a different actuator family is the answer. The stop screw is a mechanical end stop for the extend stroke, not a mid-stroke lock, so on air loss the piston still drifts and a separate holding valve is needed for suspended loads. FA flange or LB foot mounting suits heavy frames; the optional -S magnet enables CMSE / DMSE switches, and without that code no magnet is fitted.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push is 8590.3 N; theoretical maximum is 1251.4 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, and the port is 1/4" PT with a male rod thread.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it suits tight presses and gantries. A fixed TPU bumper at each end absorbs end-of-stroke energy but never locks or brakes a load. Position sensing requires the optional -S magnet code; with it, CMSE / DMSE switches ride the body slots, and without -S no magnet is fitted.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.