verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC ACEJ Series · ISO 21287 Compact Cylinder

Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X250-20B

The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X250-20B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 250mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.

  • BoreØ125 mm
  • Stroke250 mm
  • Port size1/4"
  • Acting typeDouble acting, double rod, adjustable stroke
  • Rod threadM16×2.0
  • CushionFixed TPU bumper (both ends)
$286.21 $309.22Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every ACEJ125 stroke, adjustment, mounting and version on one page All ACEJ125 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X250-20B

The ACEJ125X250-20B is a double acting ISO 21287 compact cylinder with a 125 mm bore and a 250 mm stroke that an external stop screw trims by up to 20 mm, giving a usable extend range of 230-250 mm. At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N, rising to 8590.3 N on the extend stroke at 0.7 MPa. As a rule of thumb, plan on roughly 3680 N of real work at 0.5 MPa, which is about 375 kg of horizontal load.

The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this heavy-thrust cylinder still fits presses, gantries and machine frames where a full-length body would not. The hard-anodized aluminium body carries a S45C hard-chrome plated 25 mm rod, fixed TPU bumpers absorb end-of-stroke energy, and the male rod thread (B code) bolts straight into standard tooling. Note that the stop screw sets the end of stroke only - it is not a mid-stroke lock, so the piston still drifts if air is lost.

Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X250-20B Technical Specifications

ModelAirtac ACEJ125 Adjustable Compact Cylinder ACEJ125X250-20B
SeriesACEJ compact cylinder
StandardISO 21287
Bore sizeØ125 mm
Stroke250 mm
Acting typeDouble acting, double rod, adjustable stroke
Port size1/4"
Rod threadM16×2.0
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed TPU bumper (both ends)
Max standard strokeUp to 300 mm

Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.

Theoretical Output Force (Ø125mm)

PressureForce (both ways)
0.5 MPa5890 N
0.7 MPa8247 N
Max (@1.0 MPa)1201 kgf

ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).

Model Code: Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X250-20B

ACEJISO 21287 compact cylinder (adjustable-stroke).
125Bore size in mm.
×250Stroke length in mm.
-20Adjustable stroke window (mm the extend stroke can be shortened on site).
SOptional built-in magnet for CMSE / DMSE sensors (omit for no magnet).
BRod type: B = male thread; blank = female thread.

ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.

Where the Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X250-20B Is Used

compress

Heavy press and staking stations

The 6135.9 N extend force at 0.5 MPa (8590.3 N at 0.7 MPa) suits staking, crimping and light forming on aluminium housings, while the 20 mm window lets the operator set the exact bottom-of-stroke position per part.

factory

Clamping fixtures on machining lines

In CNC transfer lines the compact body fits inside fixture guards where a full-length ISO 15552 profile cylinder cannot, and the LB foot or FA flange mounting drops onto standard fixture plates.

Is the Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X250-20B the Right Cylinder?

If the stroke must be set exactly on site, the -20 window covers trims of up to 20 mm below the full 250 mm. Mount with FA flange or LB foot brackets on the ISO 21287 face, and remember the rod end is male thread (B). If position feedback is needed later, order the -S variant, because this model has no magnet and no CMSE / DMSE switch can be fitted.

AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Short stroke fits the compact body
  • ✓ Port/thread type (PT / G)
  • ✓ Add -S if you need the magnet for sensors
  • ✓ Rod type (female / male B) & mount (FA/LB/CA)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Compact body: keep the stroke short and avoid side load on the rod.
  • check Do not dismantle the threaded front/back covers.
  • check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
  • check Installation by qualified personnel per AirTAC docs.

Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X250-20B FAQ

At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push is 8590.3 N and pull 8246.7 N; theoretical maximum is 1251.4 kgf at 1.0 MPa. The -20 code means an external stop screw shortens the 250 mm extend stroke by up to 20 mm, so the working range is 230-250 mm. It runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C. The stop is an end stop only, not a load-holding brake.

It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, S45C hard-chrome plated 25 mm rod, 1/4" PT ports and fixed TPU bumpers at both ends; the body is about 50% shorter in mounting length than an ISO 15552 profile cylinder. This version has a male rod thread (B code). FA flange, LB foot, FTC brackets and I/Y rod knuckles bolt to the ISO 21287 face. Sensors need the optional -S magnet code - this model has no magnet, so CMSE / DMSE switches cannot be mounted unless you order the -S variant.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X250-20B

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for ACEJ125X250-20B and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.