
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X250-40B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 250mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X250-40B is a double acting ISO 21287 compact cylinder with a 125 mm bore and a 250 mm extend stroke that an external stop screw trims on site within the ordered 40 mm window, giving a usable range of 210-250 mm. At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N, rising to 8590.3 N at 0.7 MPa, with a theoretical peak of 1251.4 kgf at 1.0 MPa. The male rod thread (B code) on the 25 mm rod bolts straight into tooling plates.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this heavy-thrust cylinder still fits presses, guarding and gantries where a full-length body will not. A fixed TPU bumper at each end absorbs end-of-stroke energy, the hard-anodized aluminium body carries the 1/4" PT ports, and the optional -S magnet enables CMSE / DMSE switches - without -S no magnet is fitted.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X250-40B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 250 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Clamps a mold half against a 210-250 mm adjustable approach stroke at up to 8590.3 N at 0.7 MPa, with LB foot mounting and the male rod thread tying into the machine platens.
Remember the stop screw is a mechanical end stop for the extend stroke only; on air loss the piston still drifts, so add a separate valve or lock if the load must be held mid-travel.
FA flange or LB foot mounts bolt to the ISO 21287 face, and I / Y rod knuckles suit the male rod thread. If position feedback matters, order the -S code so CMSE / DMSE switches can ride the body slots. Operating window is 0.15-1.0 MPa (22-145 psi), 30-500 mm/s, -20 to +70 C.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa it pushes 8590.3 N and pulls 8246.7 N, with a theoretical maximum of 1251.4 kgf at 1.0 MPa. The -40 code sets a 40 mm adjustment window: an external stop screw shortens the 250 mm extend stroke to any length down to 210 mm. It is an end stop only - it never holds a load if air is lost. Speed range is 30-500 mm/s at 0.15-1.0 MPa (22-145 psi).
It is an ISO 21287 compact cylinder whose hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with an S45C hard-chrome 25 mm rod and fixed TPU bumpers at both ends. The magnet is not fitted as standard - order the optional -S code to run CMSE / DMSE switches in the body slots. FA flange and LB foot mounts plus I / Y rod knuckles bolt to the standard ISO 21287 face, and the 1/4" PT ports take plant air filtered to 40 um.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.