
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X250-75B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 250mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X250-75B is a double acting ISO 21287 compact cylinder with a 125 mm bore and a 250 mm stroke that an external stop screw trims by up to 75 mm, giving a usable extend range of 175-250 mm. At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N, rising to 8590.3 N on the extend stroke at 0.7 MPa. The male rod thread (B code) on the 25 mm rod bolts straight to tooling plates and knuckles.
The hard-anodized aluminium body with an S45C hard-chrome rod sits in a short ISO 21287 package that saves about 50% of the mounting length of an ISO 15552 profile cylinder, so heavy presses and clamps fit inside tight machine frames. Fixed TPU bumpers absorb end-of-stroke shock, speed runs 30-500 mm/s, and the optional -S magnet enables CMSE / DMSE switches.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X250-75B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 250 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
8590.3 N of extend force at 0.7 MPa presses bearing races and bushings into housings on automotive assembly lines, with the 75 mm window letting one cylinder serve several part heights.
The short ISO 21287 body tucks under fixture plates where a full-length profile cylinder would foul the spindle cover, holding castings against 6135.9 N of clamp force at 0.5 MPa.
A 250 mm stroke trimmed down to 175 mm swings material-handling gates and lift-table stops, with the male rod thread picking up Y knuckles for pivoting motion.
If your fixture needs position feedback, order the -S version so CMSE / DMSE switches can be fitted; this model has no magnet. FA flange and LB foot mounts plus I and Y rod knuckles suit the male thread. Note the stop screw is an extend-stroke end stop only - on air loss the piston drifts, so add a separate valve or lock for load holding. Confirm overall dimensions from datasheet.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push is 8590.3 N and pull 8246.7 N, with a theoretical maximum of 1251.4 kgf at 1.0 MPa. The -75 code sets a 75 mm adjustment window: an external stop screw shortens the 250 mm extend stroke on site to any length from 175 to 250 mm. It shortens the stroke only and acts as an end stop, not a mid-stroke lock.
The ISO 21287 compact body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a hard-anodized aluminium body, S45C hard-chrome rod and fixed TPU bumpers at both ends. Sensors are possible only on the -S version, which carries the optional magnet for CMSE / DMSE switches; this model without the S code has no magnet. Mounting options include FA flange and LB foot, and the 1/4" PT ports suit typical plant air at 0.15-1.0 MPa (22-145 psi).
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.