
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X275-40B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 275mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
A double acting heavy-thrust actuator with an adjustable extend stroke, the ACEJ125X275-40B pairs a 125 mm bore with a 275 mm stroke and a male rod thread (B code). At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push rises to 8590.3 N, with a theoretical ceiling of 1251.4 kgf at 1.0 MPa. An external stop screw trims the extend stroke anywhere within the ordered 40 mm window, giving a usable range of 235-275 mm without swapping the cylinder.
The ISO 21287 compact body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this force class fits presses and gantries that cannot spare the envelope. The hard-anodized aluminium body carries a S45C hard-chrome rod, fixed TPU bumpers at both ends, and runs 30-500 mm/s on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi).
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X275-40B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 275 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×275 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
FA flange mounting and the male rod thread let the cylinder clamp large castings against machining fixtures, trimming the extend stroke on site so the clamp seats identically across part variants.
Remember the stop screw sets the extend position but is not a mid-stroke lock - on air loss the piston still drifts, so add a valve or external stop if the load must be held. FA flange or LB foot mounting bolts to the ISO 21287 face, and the male rod thread suits external knuckles; order the -S code if you later want CMSE / DMSE switch positions, since this non-S version carries no magnet.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
Push is 6135.9 N and pull 5890.5 N at 0.5 MPa; at 0.7 MPa push reaches 8590.3 N, and the theoretical maximum is 1251.4 kgf at 1.0 MPa. The 125 mm bore drives a 25 mm rod over a 275 mm stroke, adjustable down to 235 mm via the 40 mm stop-screw window. It runs double acting on air at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s, with a 1/4" PT port and male rod thread.
It is an ISO 21287 compact cylinder: hard-anodized aluminium body, S45C hard-chrome-plated rod, threaded aluminium covers and fixed TPU bumpers at both ends that absorb end-of-stroke energy. The body is about 50% shorter in mounting length than an ISO 15552 profile cylinder. This version has no magnet; ordering the optional -S code enables CMSE / DMSE switches for end-of-stroke detection, and FA flange or LB foot mounting bolts straight to the standard face.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.