
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X275-75B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 275mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The B code gives a male rod thread on the 25 mm rod, and the -75 code fits an external stop screw that trims the extend stroke on site anywhere within a 75 mm window, so the usable range is 200-275 mm without changing the cylinder.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters when a 275 mm heavy-thrust axis must fit inside a press fixture or gantry. A fixed TPU bumper sits at both ends, the hard-anodized aluminium body carries the 1/4" ports, and the optional -S magnet enables CMSE / DMSE switches - this unit is ordered without it.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X275-75B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 275 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×275 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Ejects cast housings or stacked pallets off a conveyor end stop, where the 25 mm male-thread rod takes a formed pusher plate and the compact body fits under the frame.
At this bore class the 125 mm size is near the top of the range: it pushes 6135.9 N at 0.5 MPa where an 80 mm bore gives 2513.3 N. If your load needs less than about 2500 N, step down to the 80 mm; if you need the full 1251.4 kgf theoretical class, the 125 mm is the largest bore offered. Remember the -75 stop screw only shortens the extend stroke - it is a mechanical end stop, not a mid-stroke lock, so the rod still drifts if air is lost. Choose FA flange or LB foot mounting for the ISO 21287 face, and add the -S code if CMSE / DMSE position sensing will be needed later.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa those rise to 8590.3 N and 8246.7 N, with a theoretical maximum of 1251.4 kgf at 1.0 MPa. The -75 code is a 75 mm adjustment window: an external stop screw shortens the 275 mm extend stroke to any setting between 200 and 275 mm. It is a mechanical end stop only - it never holds a load if air pressure is lost. Operating range is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, air filtered to 40 um, temperature -20 to +70 C, with a fixed TPU bumper at both ends.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so a 275 mm stroke fits where a full-profile cylinder will not. FA flange and LB foot mountings bolt to the standard ISO 21287 face. Position sensing requires the optional -S magnet code, which allows CMSE / DMSE switches to ride the body slots; this model is ordered without the magnet, so no sensor can be mounted unless -S is specified. The B code provides a male thread on the 25 mm rod, and ports are 1/4" PT.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.