
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X30-10B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 30mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X30-10B is a double acting ISO 21287 compact cylinder with a 125 mm bore and a 30 mm stroke that an external stop screw trims by up to 10 mm, giving a usable extend range of 20-30 mm. At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N, rising to 8590.3 N at 0.7 MPa - enough to index heavy pallets or press light assemblies without a separate booster.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this 125 mm bore fits where a full-profile cylinder would not. A hard-anodized aluminium body carries a 25 mm S45C hard-chrome rod with a male thread (the B code), a fixed TPU bumper sits at both ends, and speed runs 30-500 mm/s at 0.15-1.0 MPa (22-145 psi). This unit has no magnet fitted; order the optional -S code if you later need CMSE / DMSE switch sensing.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X30-10B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 30 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
About 3680 N of practical working force at 0.5 MPa presses small bearings and bushings into housings, while the 30 mm stroke keeps the cylinder footprint tight inside the press frame.
Choose the 100 mm bore if your load sits under about 240 kg of working force; stay at 125 mm for heavy clamping or lifting. The stop screw only shortens the extend stroke and is a mechanical end stop, not a mid-stroke lock - on air loss the piston still drifts, so add a valve or external stop if you must hold position. FA flange or LB foot mountings bolt to the ISO 21287 face, and the male rod thread suits rod knuckles such as the I or Y type. Note this unit ships without a magnet; the -S code adds one for CMSE / DMSE switches.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
Push is 6135.9 N and pull 5890.5 N at 0.5 MPa; at 0.7 MPa push reaches 8590.3 N and pull 8246.7 N, with a theoretical maximum of 1251.4 kgf at 1.0 MPa. The -10 code is a 10 mm adjustment window: an external stop screw shortens the 30 mm extend stroke on site, so the usable range is 20-30 mm. It cannot lengthen the stroke past 30 mm, and the stop is not a load-holding brake - on air loss the piston still drifts.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so a 125 mm bore fits tight gantries and guarded cells. FA flange and LB foot mountings bolt straight to the standard face, and the male rod thread (B code) accepts I or Y rod knuckles. Position sensing needs the optional -S magnet, which enables CMSE / DMSE switches; this model without the S code carries no magnet, so no switch can be mounted. Operating window is 0.15-1.0 MPa (22-145 psi), -20 to +70 C, 30-500 mm/s, with a fixed TPU bumper at both ends.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.