
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X30-20B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 30mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X30-20B is a double acting ISO 21287 compact cylinder with a 125 mm bore and a 30 mm stroke that can be trimmed on site by up to 20 mm, giving a usable extend range of 10-30 mm. An external stop screw sets the exact end position without changing the air supply, and a fixed TPU bumper at each end absorbs end-of-stroke shock. At 0.5 MPa this bore pushes 6135.9 N and pulls 5890.5 N, enough for heavy clamping and press-fit work. The male rod thread (B code) ends in a 25 mm hard-chrome-plated S45C rod, and air is fed through a 1/4" port.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this 12-tonne-class thruster fits presses and fixtures where a full-length body cannot. The hard-anodized aluminium body with roller-burnished bore resists wear, and FA flange or LB foot mounts bolt straight to the ISO 21287 face. Note: no magnet is fitted on this version; order the -S code if you need CMSE / DMSE switch sensing.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X30-20B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 30 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Bolts to FA flange fixtures on engine-block machining lines, clamping castings with about 3682 N of practical force while the compact body fits inside the fixture envelope.
Swings heavy gates and lift-and-locate stops on warehouse conveyor lines; the male rod thread takes Y knuckles directly, and the 30 mm stroke suits quick index moves at up to 500 mm/s.
If your load is under 4000 N, the ACEJ100X30-20 saves space and air. The -20 stop screw only shortens the extend stroke within 10-30 mm; it is a mechanical end stop, not a mid-stroke lock, so the rod still drifts if air is lost - add a valve or external stop if you must hold position. Choose the B male rod thread for external rod couplers and knuckles, PT ports for standard pneumatic circuitry, and order the -S variant if CMSE / DMSE switches are needed later.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa it pushes 8590.3 N and pulls 8246.7 N; theoretical maximum is 1251.4 kgf at 1.0 MPa. The -20 code gives a 20 mm adjustment window, so the 30 mm extend stroke can be trimmed to any position between 10 and 30 mm with the external stop screw. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the 1/4" port takes PT thread fittings.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, roller-burnished bore, threaded aluminium covers, a 25 mm hard-chrome S45C rod with male thread, and fixed TPU bumpers at both ends that absorb end-of-stroke energy. The body is about 50% shorter in mounting length than an ISO 15552 profile cylinder. This version has no magnet, so no switch can be read; order the -S code to enable CMSE / DMSE reed or solid-state switches. Mounting: FA flange, LB foot, plus I and Y rod knuckles.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.