
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X300-75B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 300mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X300-75B is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 300 mm stroke by up to 75 mm on site, giving a usable range of 225-300 mm. The hard-anodized aluminium body carries a 25 mm S45C hard-chrome rod and a 1/4" PT port.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so heavy clamping or pressing stations fit into presses and gantries that cannot take a full-length profile cylinder. A fixed TPU bumper at each end absorbs end-of-stroke energy, and speed spans 30-500 mm/s.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X300-75B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 300 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
The 225-300 mm adjustable stroke and 25 mm hard-chrome rod suit heavy slide gates and ladle stops in foundries, where the compact body fits between guard plates that exclude a full ISO 15552 profile cylinder.
The stop screw is a mechanical end stop for the extend stroke only - it does not lock the piston mid-stroke, so on air loss the rod can still drift and a separate holding valve is needed for suspended loads. This B-code unit has a male rod thread and PT ports; FA flange or LB foot mounts bolt to the ISO 21287 face. No magnet is fitted, so position sensing is impossible unless you order the -S variant, which then accepts CMSE / DMSE switches.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa it pushes 8590.3 N and pulls 8246.7 N; theoretical maximum is 1251.4 kgf at 1.0 MPa. The -75 code sets a 75 mm adjustment window: an external stop screw shortens the 300 mm extend stroke to any length down to 225 mm. It runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), -20 to +70 C, speed 30-500 mm/s, with a fixed TPU bumper at both ends.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and FA flange or LB foot mounts plus I/Y rod knuckles bolt to the standard face. The B code gives a male rod thread on the 25 mm rod; ports are 1/4" PT. This unit has no magnet fitted - the optional -S code adds one so CMSE / DMSE switches can read position. The TPU bumper only decelerates at the ends and never holds a load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.