
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X35-10B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 35mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X35-10B is a double acting ISO 21287 compact cylinder with a 125 mm bore and a 35 mm stroke that an external stop screw trims by up to 10 mm, giving a usable extend range of 25-35 mm. At 0.5 MPa it pushes with 6135.9 N and pulls with 5890.5 N, rising to 8590.3 N at 0.7 MPa, with a theoretical ceiling of 1251.4 kgf at 1.0 MPa. The male rod thread (B code) on the 25 mm rod bolts straight into standard tooling.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this 125 mm force class fits presses and clamping gantries where a full-length body cannot. The hard-anodized aluminium body carries a S45C hard-chrome rod, a fixed TPU bumper at each end, and speeds of 30-500 mm/s at 0.15-1.0 MPa (22-145 psi).
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X35-10B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 35 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
A short 35 mm throw is exactly what lift-and-locate pallet stops on conveyor lines need; the compact body slots under guard rails where a full-length body would overhang.
Clamps and unlatches heavy mold slides on die carts and molding machines, where the male rod thread (B code) picks up existing tooling links and the 312 kg vertical-lift margin covers the slide mass.
There is no larger standard bore in the series, so if 8590.3 N at 0.7 MPa is still short, split the job across two cylinders. The stop screw only sets the extend end position and does not lock the load; on air loss the piston still drifts, so add a separate holding valve for suspended loads. Mount with FA flange or LB foot on the ISO 21287 face, and if you need position feedback, order the -S variant so CMSE / DMSE switches can be fitted - this model has no magnet.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
The -10 code sets a 10 mm adjustment window: an external stop screw shortens the 35 mm extend stroke to any length from 25 to 35 mm. It is an end stop only - it never holds a load against air loss. Operating range is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, air filtered to 40 um, temperature -20 to +70 C.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits tight guards and gantries. Both ends carry a fixed TPU bumper that decelerates the piston. FA flange and LB foot mount on the standard face, with I and Y rod knuckles on the male-threaded rod. Position sensing requires the optional -S magnet, which enables CMSE / DMSE switches; this model (no S code) has no magnet, so no switch can be mounted on it.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.