
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X35-20B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 35mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X35-20B is a double acting ISO 21287 compact cylinder with a 125 mm bore and a 35 mm stroke that an external stop screw trims on site by up to 20 mm, giving a usable extend range of 15-35 mm. At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N, rising to 8590.3 N at 0.7 MPa, so it replaces bulkier full-size actuators in heavy clamping and pressing stations. The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters when the envelope around a press die or weld fixture is tight.
The hard-anodized aluminium body carries a 25 mm S45C hard-chrome rod with a male thread (the B code), the 1/4" ports suit bores 80 and up, and a fixed TPU bumper at each end absorbs end-of-stroke shock. FA flange and LB foot mounts bolt straight to the ISO 21287 face, and the optional -S magnet enables CMSE / DMSE switches when ordered.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X35-20B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 35 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
The male-threaded 25 mm rod drives knockout plates in automotive weld fixtures, with LB foot mounting and the short ISO 21287 body fitting inside the fixture frame.
Size down if your load is light: a 100 mm bore pushes 3927.0 N at 0.5 MPa, while stepping to the 125 mm bore gives 6135.9 N - choose this model when the extra 2200 N covers die weight or clamp reaction. Note that the stop screw only shortens the extend stroke and is a mechanical end stop, not a mid-stroke lock, so the rod can drift if air is lost. Specify the optional -S code if CMSE / DMSE position switches are needed, and pick FA flange or LB foot mounting to match the fixture.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
Push is 6135.9 N and pull is 5890.5 N at 0.5 MPa; at 0.7 MPa push reaches 8590.3 N, and the theoretical maximum is 1251.4 kgf at 1.0 MPa. The -20 code sets a 20 mm adjustment window: an external stop screw shortens the 35 mm extend stroke by up to 20 mm, so the working range is 15-35 mm. It runs double acting on air at 0.15-1.0 MPa (22-145 psi) at 30-500 mm/s.
It is an ISO 21287 compact cylinder whose short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a fixed TPU bumper at both ends and FA flange or LB foot options. Sensors are not fitted as standard: order the optional -S magnet version to enable CMSE / DMSE switches; without -S there is no magnet and no switching.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.