
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X40-10B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 40mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X40-10B is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 40 mm stroke by up to 10 mm on site, giving a usable 30-40 mm range. The male rod thread (B code) and 1/4" PT ports suit heavy clamp and press fixtures.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this force class fits inside presses, guarding and gantries that cannot house a full-length body. A fixed TPU bumper at each end absorbs end-of-stroke energy, and the hard-anodized aluminium body with S45C hard-chrome rod stands up to high-cycle duty.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X40-10B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 40 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Machine frames and weldments are clamped with roughly 3680 N of usable force at 0.5 MPa; the male rod thread takes a Y knuckle for swing clamps on the ISO 21287 mounting face.
If your load needs less than 3927 N at 0.5 MPa, the 100 mm bore covers it in a smaller envelope; if you need more than 8590.3 N at 0.7 MPa, step up to a larger series. The -10 window means the stop screw shortens the extend stroke within 10 mm only - it never lengthens the stroke past 40 mm, and it is a mechanical end stop, not a mid-stroke lock: on air loss the piston still drifts, so do not rely on it to hold a load. Mounting: FA flange and LB foot bolt to the ISO 21287 face, with I and Y rod knuckles for the male-threaded rod. This unit has no magnet; if you need CMSE or DMSE switches for end-position sensing, order the -S variant instead.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa it pushes 8590.3 N and pulls 8246.7 N, with a theoretical maximum of 1251.4 kgf at 1.0 MPa. The -10 code sets a 10 mm adjustment window: an external stop screw shortens the 40 mm extend stroke to any length from 30 to 40 mm. It is a mechanical end stop only - it does not hold a load if air is lost. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, air filtered to 40 um, temperature -20 to +70 C.
The ISO 21287 compact body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so a 125 mm bore fits where only a short body will. Both ends carry a fixed TPU bumper that decelerates the piston at the ends of travel. FA flange and LB foot mountings bolt straight to the standard face, and the B code gives a male rod thread for I or Y knuckles. Position sensing requires the optional -S magnet: this model has no magnet fitted, so order ACEJ125X40-10SB if you want CMSE or DMSE switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.