
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X40-20B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 40mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X40-20B is a double acting ISO 21287 compact cylinder with a 125 mm bore and a 40 mm stroke that an external stop screw trims on site by up to 20 mm, giving a usable extend range of 20-40 mm. At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N, and a fixed TPU bumper at each end absorbs end-of-stroke energy. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this force class fits presses and heavy jigs where a full-length profile cylinder will not.
The hard-anodized aluminium body carries a 25 mm S45C hard-chrome rod with a male thread (the B code), and the 1/4" port matches this bore. Note that the stop screw is a mechanical end stop only - on air loss the piston still drifts, so it is not a load-holding lock.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X40-20B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 40 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
A compact 125 mm bore gives 6135.9 N at 0.5 MPa for crimping or staking aluminium brackets, and the 20-40 mm trimmed stroke keeps the die cycle tight on short parts.
Clamps steel weldments on an automotive fixture line; the short body fits inside the fixture frame where an ISO 15552 profile cylinder would not, and the stop screw dials in exact clamp travel.
Pushes heavy castings or gates sideways at up to 500 mm/s; the 25 mm hard-chrome rod and male B thread accept a yoke knuckle for side-load tolerance.
If you need more theoretical force, the 125 mm bore already delivers a 1251.4 kgf maximum at 1.0 MPa - there is no larger ACEJ. The 20 mm window means your final stroke must land between 20 and 40 mm; if you need a longer trim range, order a larger -NN window code. Bolt FA flange or LB foot mounts and I/Y rod knuckles to the ISO 21287 face, and remember the magnet is the optional -S code - this model has no magnet, so CMSE / DMSE switches cannot be fitted unless you order -S.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push rises to 8590.3 N, and the theoretical maximum is 1251.4 kgf at 1.0 MPa. The -20 code sets a 20 mm adjustment window: an external stop screw shortens the 40 mm extend stroke on site, so the usable range is 20-40 mm. It shortens only - it never extends past the ordered stroke, and it is an end stop, not a mid-stroke lock.
It is an ISO 21287 compact cylinder whose body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a hard-anodized aluminium body, S45C hard-chrome 25 mm rod, fixed TPU bumpers at both ends, 1/4" ports, and FA/LB mounting options. Position sensing requires the optional -S magnet code, which enables CMSE / DMSE switches; this model (no S) has no magnet, so no sensor can be mounted. Operating range is 0.15-1.0 MPa (22-145 psi) at 30-500 mm/s.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.