
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X40-30B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 40mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X40-30B is a double acting, adjustable-stroke compact cylinder built to ISO 21287 in a 125 mm bore. The -30 code gives a 30 mm adjustment window: an external stop screw trims the 40 mm extend stroke down to as little as 10 mm on site, so one cylinder covers several fixture positions.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters when a 125 mm bore has to fit inside a press frame or clamp gantry. A hard-anodized aluminium body carries a 25 mm S45C hard-chrome rod with a male thread (the B code), and fixed TPU bumpers absorb end-of-stroke shock. Note that the stop screw sets the end position only; on air loss the piston still drifts, so it is not a load lock.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X40-30B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 40 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
A 10-40 mm usable extend range with about 3680 N of practical working force suits staking, riveting and bearing pressing where full-length profile cylinders will not fit the frame.
The 30 mm window suits jobs where the final extend position must be dialed in per die or part; remember it only shortens the stroke and does not hold a load on air loss. Mounting bolts straight to the ISO 21287 face - FA flange or LB foot - and I/Y rod knuckles suit the male-threaded rod. This unit has no magnet; order the -S code if you need CMSE / DMSE switch positions.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
Push is 6135.9 N and pull 5890.5 N at 0.5 MPa; at 0.7 MPa push reaches 8590.3 N, with a theoretical maximum of 1251.4 kgf at 1.0 MPa. The 125 mm bore has a 25 mm male-threaded rod (B code), a 1/4" PT port, a 40 mm stroke adjustable down to 10 mm via the -30 stop screw, operating pressure 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s and a temperature range of -20 to +70 C on air filtered to 40 um.
An external stop screw shortens the extend stroke anywhere within the 30 mm window, giving a usable 10-40 mm range; it is a mechanical end stop, not a mid-stroke lock, so the piston still drifts if air is lost. Fixed TPU bumpers at both ends absorb end-of-stroke energy. This model has no magnet fitted - order the -S variant to enable CMSE / DMSE reed or solid-state switches. FA flange and LB foot mounts bolt to the ISO 21287 face, and the short body fits where an ISO 15552 profile cylinder is too long.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.