
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X45-10B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 45mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X45-10B is a double acting ISO 21287 compact cylinder with a 125 mm bore and a 45 mm stroke that an external stop screw trims by up to 10 mm, giving a usable extend range of 35-45 mm. At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N, rising to 8590.3 N on the extend stroke at 0.7 MPa. The male rod thread (B code) on the 25 mm rod bolts straight into standard tooling plates.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this 125 mm bore fits heavy presses and clamping fixtures where a full-length profile cylinder will not. FA flange and LB foot mounts plus I/Y rod knuckles bolt to the ISO 21287 face. Note that no magnet is fitted on this version; order the optional -S code if CMSE / DMSE switch sensing is needed.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X45-10B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 45 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
The 8590.3 N extend force at 0.7 MPa swages, coins and forms thick brackets, while the 10 mm window lets the setter dial the 45 mm stroke down to 35 mm for part-specific die depth.
Bearings and bushings into housings need about 3680 N of dependable work force; the short ISO 21287 body slots into tight machine frames and the male rod thread suits existing press rams.
Clamps a 300 kg die shoe vertically with margin, and the LB foot mounting plus 1/4" porting drops straight into retrofit fixtures without redesigning the manifold.
Choose the fixed-stroke ACE or the double-rod ACED if no on-site stroke trimming is required, or the TACE twin-guide when side loads or rod rotation must be controlled. The stop screw is a mechanical end stop for the extend stroke only: on air loss the piston still drifts, so it is not a load-holding lock. Running speed is 30-500 mm/s across 0.15-1.0 MPa (22-145 psi).
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push is 8590.3 N and pull 8246.7 N, with a theoretical maximum of 1251.4 kgf at 1.0 MPa. The -10 code is a 10 mm adjustment window: an external stop screw shortens the 45 mm extend stroke on site to any setting between 35 and 45 mm. It cannot lengthen the stroke past 45 mm, and it is an end stop only, not a mid-stroke lock.
It is an ISO 21287 compact cylinder whose short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a hard-anodized aluminium body, S45C hard-chrome plated 25 mm rod and fixed TPU bumpers at both ends. FA flange and LB foot mounts plus I and Y rod knuckles bolt to the ISO 21287 face. Sensing requires the optional -S magnet code, which enables CMSE / DMSE switches; this model, ordered without S, carries no magnet. Port is 1/4" PT, fluid is air filtered to 40 um, and temperature range is -20 to +70 C.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.