
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X45-30B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 45mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
A double acting ISO 21287 compact cylinder, the ACEJ125X45-30B pairs a 125 mm bore with a 45 mm stroke and a male-threaded 25 mm rod. At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N, rising to 8590.3 N on the extend stroke at 0.7 MPa. The -30 code adds a 30 mm adjustment window: an external stop screw trims the extend stroke anywhere between 15 and 45 mm without touching the machine layout.
The hard-anodized aluminium body with an S45C hard-chrome rod keeps the envelope tight - the short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into heavy presses and clamping fixtures where a full-length profile cylinder cannot. Fixed TPU bumpers absorb end-of-stroke shock at both ends.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X45-30B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 45 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
High hold-in force on forklift attachments and container grippers, with the compact body fitting inside the clamp arm geometry.
Bearing and bushing pressing on automotive lines, where the male rod thread (B code) accepts custom press tools directly.
The stop screw only shortens the extend stroke within the 30 mm window - it is a mechanical end stop, not a mid-stroke lock, so the rod still drifts if air is lost. Bolt FA flanges or LB feet to the ISO 21287 face, and remember the magnet is not fitted on this code: order the -S variant if CMSE / DMSE switches are needed later.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa those rise to 8590.3 N and 8246.7 N, with a theoretical maximum of 1251.4 kgf at 1.0 MPa. The -30 code gives a 30 mm adjustment window: an external stop screw shortens the 45 mm extend stroke to any setting between 15 and 45 mm. It is an end stop only - it never holds a load if air pressure drops.
It is an ISO 21287 compact cylinder whose short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a hard-anodized aluminium body, S45C hard-chrome 25 mm rod, 1/4" PT ports and fixed TPU bumpers at both ends. This code has no magnet fitted; order the -S version to enable CMSE / DMSE switches. Operating range is 0.15-1.0 MPa (22-145 psi), 30-500 mm/s, -20 to +70 C.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.