
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X50-10B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 50mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X50-10B is a double acting ISO 21287 compact cylinder with an adjustable extend stroke. The hard-anodized aluminium body with an S45C hard-chrome-plated 25 mm rod shrugs off wear in heavy-duty clamping and pressing duty.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this force class fits inside presses, weld fixtures and gantries where a full-length cylinder will not. A stop screw trims the extend stroke on site within the ordered -10 window, giving a usable 40-50 mm range. The B code gives a male rod thread; the optional -S magnet enables CMSE / DMSE switches, and without it no magnet is fitted.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X50-10B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 50 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Clamps large steel stampings in body-in-white jigs; the compact body saves about 50% of the mounting length of an ISO 15552 profile cylinder inside crowded fixture frames.
Step down only if your load allows. The stop screw is a mechanical end stop for the extend stroke, not a mid-stroke lock, so on air loss the piston still drifts - do not use it to hold a load. Mounting: FA flange or LB foot bolt to the ISO 21287 face, with I and Y rod knuckles for the male-threaded rod. Order the -S code if you need CMSE / DMSE position sensing; this model has no magnet as supplied. Runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s, -20 to +70 C.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push is 8590.3 N and pull 8246.7 N, with a theoretical maximum of 1251.4 kgf at 1.0 MPa. The -10 code sets a 10 mm adjustment window: an external stop screw shortens the 50 mm extend stroke by up to 10 mm, so the usable range is 40-50 mm. It runs double acting on 0.15-1.0 MPa (22-145 psi) air filtered to 40 um, at 30-500 mm/s and -20 to +70 C, with a fixed TPU bumper at both ends.
It is an ISO 21287 compact cylinder: a hard-anodized aluminium body with roller-burnished bore, threaded aluminium covers, a hard-chrome-plated S45C 25 mm rod with male thread (B code), and a 1/4" PT port. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder. FA flange and LB foot mountings plus I/Y rod knuckles bolt to the standard face. Position sensing needs the optional -S magnet ordered with the cylinder; without it no magnet is fitted, so CMSE / DMSE switches cannot be used.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.