
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X50-20B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 50mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X50-20B is a double acting, adjustable-stroke compact cylinder built to ISO 21287. The -20 code adds an external stop screw that trims the extend stroke on site anywhere within a 20 mm window, so the usable extend range is 30-50 mm without changing hardware.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters when a 50 mm stroke press or clamp must fit inside a guarded frame. The hard-anodized aluminium body carries a 25 mm S45C hard-chrome rod with a male thread (the B code), and a fixed TPU bumper at each end absorbs end-of-stroke shock. Air supply is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, fluid air filtered to 40 um.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X50-20B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 50 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
The 30-50 mm adjustable extend range lets a fixture builder dial in exact clamp travel on structural steel or cast housings without shimming the mount.
If the job needs less than about 982 N, the 50 mm bore is the lighter, cheaper pick. Remember the stop screw only shortens the extend stroke within the ordered 20 mm window - it is a mechanical end stop, not a mid-stroke lock, so the rod will drift if air is lost. Mounting: FA flange or LB foot bolt to the ISO 21287 face, with I and Y rod knuckles for the male-threaded rod. If you later need position feedback, order the -S variant to enable CMSE / DMSE switches; this model has no magnet fitted.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push is 8590.3 N and pull 8246.7 N, with a theoretical maximum of 1251.4 kgf at 1.0 MPa. The -20 code means an external stop screw can shorten the 50 mm extend stroke by up to 20 mm, giving a usable range of 30-50 mm. It is a mechanical end stop only - on air loss the piston still drifts, so it never holds a load. Operating pressure is 0.15-1.0 MPa (22-145 psi) and speed is 30-500 mm/s.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits tight guards and gantries. The hard-anodized aluminium body takes FA flange or LB foot mounts plus I/Y rod knuckles on the 25 mm male-threaded rod, and a fixed TPU bumper at both ends absorbs end-of-stroke energy. Position sensing requires the optional -S magnet code - this model has no magnet, so no CMSE or DMSE switch can be mounted unless you order that variant. Port size is 1/4" (PT).
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.