
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X50-30B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 50mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X50-30B is a double acting ISO 21287 compact cylinder with a 125 mm bore and a 50 mm stroke that an external stop screw trims on site within the ordered 30 mm window, giving a usable extend range of 20-50 mm. At 0.5 MPa it pushes with 6135.9 N and pulls with 5890.5 N, rising to 8590.3 N on the extend stroke at 0.7 MPa, with a theoretical maximum of 1251.4 kgf at 1.0 MPa. The male rod thread (B code) on the 25 mm S45C hard-chrome rod bolts straight to your tooling.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this heavy-thrust size still fits presses, gantries and guarding where a full-length body would not. A fixed TPU bumper at each end absorbs end-of-stroke energy, the hard-anodized aluminium body resists wear, and 1/4" ports feed the 30-500 mm/s speed range across 0.15-1.0 MPa (22-145 psi).
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X50-30B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 50 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
The 8590.3 N extend force at 0.7 MPa presses bearings, bushings and rivets into housings, while the 30 mm window lets you dial the 50 mm stroke down to a repeatable 20-30 mm pressing travel.
About 375 kg of usable clamp force at 0.5 MPa secures fixtures and die sets, and the short body tucks under machine guards where a full-length profile cylinder cannot reach.
At this bore there is no larger ACEJ size, so if 6135.9 N at 0.5 MPa is marginal for the job, split the load across two cylinders or add a pressure booster. The stop screw only shortens the extend stroke as a mechanical end stop; it does not lock the piston mid-stroke, so the rod will drift if air is lost - use a separate locking solution where a load must be held. Order the -S code if you later need CMSE / DMSE switches, and pick FA flange or LB foot mounting plus I or Y rod knuckles to suit the fixture.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push rises to 8590.3 N, and the theoretical maximum is 1251.4 kgf at 1.0 MPa. The -30 code sets a 30 mm adjustment window: an external stop screw shortens the 50 mm extend stroke by up to 30 mm, so the working range is 20-50 mm. It is a mechanical end stop only - it never holds a load if air pressure drops. Speed range is 30-500 mm/s at 0.15-1.0 MPa (22-145 psi).
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a hard-anodized aluminium body, S45C hard-chrome 25 mm rod, fixed TPU bumpers at both ends and 1/4" ports. FA flange and LB foot mounts plus I/Y rod knuckles bolt to the standard face. Sensors are not possible on this unit as ordered: this code has no magnet, so order the optional -S version to enable CMSE / DMSE switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.