
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X55-20B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 55mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X55-20B is a double acting ISO 21287 compact cylinder with an adjustable extend stroke. The male rod thread (B code) on the 25 mm rod suits tooling that bolts directly to a threaded stud. An external stop screw trims the 55 mm stroke by up to 20 mm, giving a usable extend range of 35-55 mm, set on site with a wrench.
The hard-anodized aluminium body with an S45C hard-chrome rod keeps the envelope short: it saves about 50% of the mounting length of an ISO 15552 profile cylinder, so heavy clamping fits inside tight presses and weld fixtures. FA flange and LB foot mounts bolt to the standard ISO 21287 face, and the fixed TPU bumper at each end absorbs end-of-stroke shock. Speed range is 30-500 mm/s at 0.15-1.0 MPa (22-145 psi).
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X55-20B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 55 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×55 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
In an automotive weld fixture, the short ISO 21287 body fits where a full-length profile cylinder would clash with clamps, while the male rod thread picks up existing tooling arms.
Remember the stop screw is a mechanical end stop only: on air loss the piston drifts, so add a separate valve or lock for load holding. This version has no magnet; if you need CMSE or DMSE switch position feedback, order the -S code instead. Choose PT ports (standard) or G on request, and pair with FA or LB mounts for fixture work.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push is 8590.3 N and pull 8246.7 N, with a theoretical maximum of 1251.4 kgf at 1.0 MPa. The -20 code sets a 20 mm adjustment window: an external stop screw shortens the 55 mm extend stroke, so the working range is 35-55 mm. It runs double acting on filtered air at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s, with a fixed TPU bumper at both ends.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into dense fixtures. FA flange and LB foot mounts bolt to the standard face, with I and Y rod knuckles available. Position feedback requires the optional -S magnet code, which enables CMSE or DMSE switches; this model, without the S code, carries no magnet. The 1/4" port is fixed by the 125 mm bore, and strokes up to 300 mm are standard for this size.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.