verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC ACEJ Series · ISO 21287 Compact Cylinder

Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X55-40B

The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X55-40B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 55mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.

  • BoreØ125 mm
  • Stroke55 mm
  • Port size1/4"
  • Acting typeDouble acting, double rod, adjustable stroke
  • Rod threadM16×2.0
  • CushionFixed TPU bumper (both ends)
$202.29 $219.63Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every ACEJ125 stroke, adjustment, mounting and version on one page All ACEJ125 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X55-40B

A double acting ISO 21287 compact cylinder with an adjustable extend stroke, the ACEJ125X55-40B pairs a 125 mm bore with a 55 mm stroke that an external stop screw trims by up to 40 mm on site, giving a usable extend range of 15-55 mm. At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N, rising to 8590.3 N on the extend stroke at 0.7 MPa. The male rod thread (B code) on the 25 mm S45C hard-chrome rod bolts directly to tooling.

The hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this heavy-force class still fits short press fixtures and guarding. A fixed TPU bumper at each end absorbs end-of-stroke energy. Note this model ships without the optional -S magnet, so CMSE / DMSE switches cannot be fitted unless the magnet is ordered.

Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X55-40B Technical Specifications

ModelAirtac ACEJ125 Adjustable Compact Cylinder ACEJ125X55-40B
SeriesACEJ compact cylinder
StandardISO 21287
Bore sizeØ125 mm
Stroke55 mm
Acting typeDouble acting, double rod, adjustable stroke
Port size1/4"
Rod threadM16×2.0
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed TPU bumper (both ends)
Max standard strokeUp to 300 mm

Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.

Theoretical Output Force (Ø125mm)

PressureForce (both ways)
0.5 MPa5890 N
0.7 MPa8247 N
Max (@1.0 MPa)1201 kgf

ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).

Model Code: Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X55-40B

ACEJISO 21287 compact cylinder (adjustable-stroke).
125Bore size in mm.
×55Stroke length in mm.
-40Adjustable stroke window (mm the extend stroke can be shortened on site).
SOptional built-in magnet for CMSE / DMSE sensors (omit for no magnet).
BRod type: B = male thread; blank = female thread.

ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.

Where the Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X55-40B Is Used

factory

Heavy sliding-gate drive on a machining line

A 125 mm bore shoves a loaded steel gate or fixture pallet through a guard slot where a full-length ISO 15552 profile cylinder would not fit; the 25 mm hard-chrome rod resists side scuffing at 30-500 mm/s.

Is the Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X55-40B the Right Cylinder?

If 55 mm is more travel than the tool needs, the 40 mm window lets maintenance shorten the extend stroke without swapping the cylinder. The stop screw is a mechanical end stop only; on air loss the piston still drifts, so add a separate valve or lock for load holding.

Mounting: FA flange or LB foot brackets bolt to the ISO 21287 face, and I / Y rod knuckles suit the male rod thread. Ports are 1/4" (PT thread by default, G available). Operating window is 0.15-1.0 MPa (22-145 psi) with speed 30-500 mm/s. Order the -S variant if position sensing via CMSE / DMSE switches is planned later.

AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Short stroke fits the compact body
  • ✓ Port/thread type (PT / G)
  • ✓ Add -S if you need the magnet for sensors
  • ✓ Rod type (female / male B) & mount (FA/LB/CA)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Compact body: keep the stroke short and avoid side load on the rod.
  • check Do not dismantle the threaded front/back covers.
  • check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
  • check Installation by qualified personnel per AirTAC docs.

Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X55-40B FAQ

Push is 6135.9 N and pull 5890.5 N at 0.5 MPa; at 0.7 MPa push reaches 8590.3 N and pull 8246.7 N, with a theoretical maximum of 1251.4 kgf at 1.0 MPa. The -40 code sets a 40 mm adjustment window: an external stop screw shortens the 55 mm extend stroke by up to 40 mm, so the working range is 15-55 mm. It cannot lengthen the stroke past 55 mm, and the stop is not a mid-stroke lock - on air loss the piston still drifts.

The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a hard-anodized aluminium body, S45C hard-chrome rod and fixed TPU bumpers at both ends. FA flange and LB foot mounts plus I / Y rod knuckles bolt to the standard face. Position sensing needs the optional -S magnet ordered with the cylinder; this model has no magnet, so CMSE / DMSE switches cannot be retrofitted to it. Ports are 1/4" (PT or G).

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X55-40B

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for ACEJ125X55-40B and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.