
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X55-50B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 55mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X55-50B is a double acting ISO 21287 compact cylinder with a 125 mm bore and a 55 mm stroke that an external stop screw trims on site within the ordered 50 mm window, giving a usable extend range of 5-55 mm. At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa those figures rise to 8590.3 N and 8246.7 N, with a theoretical maximum of 1251.4 kgf at 1.0 MPa. The male rod thread (B code) on the 25 mm S45C hard-chrome rod bolts straight into standard tooling.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this heavy-force class fits clamping stations and press fixtures where a full-length profile body will not. A fixed TPU bumper sits at both ends, the hard-anodized aluminium body runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), and speed spans 30-500 mm/s.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X55-50B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 55 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×55 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Weld-cell jigs on automotive frames use the 5-55 mm trimmed extend range to clamp steel stampings with about 3682 N of usable force at 0.5 MPa, inside a guard-sized body.
Bearing and bushing presses benefit from the 125 mm bore: 8590.3 N at 0.7 MPa seats press-fit parts where the 50 mm window lets you dial the exact bottom position per die.
Heavy slide gates on machining lines set a hard mechanical stop via the stop screw; the male rod thread and FA flange bolt straight to existing ISO 21287 fixtures.
Remember the -50 stop screw only shortens the extend stroke to as little as 5 mm - it is a mechanical end stop, not a mid-stroke lock, so the piston still drifts if air is lost. Mount with FA flange or LB foot on the ISO 21287 face; there is no magnet fitted on this version, so order the -S code if you later need CMSE / DMSE switch positioning.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
Push is 6135.9 N and pull is 5890.5 N at 0.5 MPa; at 0.7 MPa push reaches 8590.3 N and pull 8246.7 N, with a theoretical maximum of 1251.4 kgf at 1.0 MPa. The -50 code is a 50 mm adjustment window: an external stop screw shortens the 55 mm extend stroke on site to anywhere between 5 and 55 mm. It is a mechanical end stop only - on air loss the piston still drifts, so do not treat it as a load-holding brake.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a hard-anodized aluminium body, 25 mm hard-chrome S45C rod, 1/4" PT ports and fixed TPU bumpers at both ends. Mounting options include FA flange and LB foot plus I/Y rod knuckles. This version has no magnet fitted; the optional -S magnet enables CMSE / DMSE switches for end-position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.