
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X60-20B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 60mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X60-20B is a double acting, adjustable-stroke compact cylinder built to ISO 21287: a 125 mm bore with a 60 mm stroke that an external stop screw trims by up to 20 mm, giving a usable extend range of 40-60 mm. At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N, rising to 8590.3 N on the extend stroke at 0.7 MPa - enough for heavy clamping and pressing work in a body that saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The hard-anodized aluminium body carries a 25 mm S45C hard-chrome-plated rod, and the B code gives a male rod thread for direct bolt-on tooling. The optional -S magnet enables CMSE / DMSE switches; without it no sensing is possible. Air supply is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, with a fixed TPU bumper at each end.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X60-20B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
The short ISO 21287 body fits inside tight jig walls where a full-length profile cylinder will not, and the male rod thread (B code) takes a machined clamp tip directly.
If you need more theoretical muscle, the 125 mm bore already delivers up to 1251.4 kgf at 1.0 MPa, the highest in the series. The 20 mm window shortens the extend stroke only - it is a mechanical end stop, not a mid-stroke lock, so the rod still drifts if air is lost. Mount with FA flange or LB foot on the ISO 21287 face, add I or Y rod knuckles as needed, and order the -S code if you want position feedback via CMSE / DMSE switches.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push is 8590.3 N and pull 8246.7 N, with a theoretical maximum of 1251.4 kgf at 1.0 MPa. The -20 code sets a 20 mm adjustment window: an external stop screw shortens the 60 mm extend stroke on site to any value from 40 to 60 mm. It is a mechanical end stop only - it does not lock or hold a load if air pressure is lost.
The ISO 21287 compact body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits guarded gantries and dense fixtures. Sensing is not fitted as standard: order the optional -S magnet version to run CMSE or DMSE switches on the body's magnet slots. The 1/4" port, FA/LB mounting and I/Y rod knuckles bolt straight onto standard ISO 21287 fixtures.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.