
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X60-30B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 60mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
A double acting AirTAC compact cylinder built to ISO 21287, the ACEJ125X60-30B pairs a 125 mm bore with a 60 mm stroke and a male rod thread (B code). At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N, placing it in the heaviest class of this series. The external stop screw trims the extend stroke by up to 30 mm on site, so the usable extend range is 30-60 mm without changing the order code.
The hard-anodized aluminium body carries an S45C hard-chrome plated 25 mm rod, and fixed TPU bumpers sit at both ends to absorb end-of-stroke shock. Because the short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, it slots into heavy clamping fixtures and press heads where a full-length body cannot. Running spec: 0.15-1.0 MPa (22-145 psi), 30-500 mm/s, air filtered to 40 um.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X60-30B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
With about 3682 N of practical working force at 0.5 MPa, the cylinder holds steel castings against CNC fixture stops, and the short ISO 21287 body fits inside tight fixture plates where an ISO 15552 profile cylinder would overhang.
Remember the stop screw is a mechanical end stop for the extend stroke, not a mid-stroke lock: on air loss the piston still drifts, so add a separate holding valve where a load must stay put. Mount with FA flange or LB foot on the ISO 21287 face, and add I or Y rod knuckles for slight misalignment. If you need position sensing, order the -S variant with the optional magnet for CMSE / DMSE switches; this model has no magnet fitted.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push rises to 8590.3 N and pull to 8246.7 N, with a theoretical maximum of 1251.4 kgf at 1.0 MPa. The -30 code means an external stop screw shortens the 60 mm extend stroke by up to 30 mm, giving a 30-60 mm usable range. It runs on air at 0.15-1.0 MPa (22-145 psi), proof tested to 1.5 MPa (215 psi), at 30-500 mm/s with fixed TPU bumpers at both ends.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, a 25 mm S45C hard-chrome rod with male thread (B code), a 1/4" PT port and a short body that saves about 50% of the mounting length of an ISO 15552 profile cylinder. FA flange and LB foot mountings plus I/Y rod knuckles bolt to the standard face. Position sensing requires the optional -S magnet ordered with CMSE / DMSE switches; this model ships without a magnet.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.