
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X70-10B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 70mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
A double acting ISO 21287 compact cylinder with a 125 mm bore and a 70 mm stroke that an external stop screw can trim by up to 10 mm, giving a usable extend range of 60-70 mm. At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N, rising to 8590.3 N at 0.7 MPa, so it handles heavy clamping and pressing in a body that saves about 50% of the mounting length of an ISO 15552 profile cylinder. The male rod thread (B code) bolts straight into standard tooling.
The hard-anodized aluminium body carries a 25 mm S45C hard-chrome-plated rod, and a fixed TPU bumper at each end absorbs end-of-stroke impact. Operating range is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, and the optional -S magnet enables CMSE / DMSE switches when ordered.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X70-10B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 70 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
A 70 mm stroke with up to 8590.3 N at 0.7 MPa suits swaging, staking and light straightening on compact press benches where a full-length profile cylinder will not fit.
Step down one size if your load is under about 400 kg equivalent. The 10 mm adjustment window suits fixtures where the final stop position is tuned on the machine; remember the stop screw is a mechanical end stop only, so the piston still drifts if air is lost. FA flange, LB foot and I/Y rod knuckles mount on the ISO 21287 face, and add the -S code if CMSE / DMSE position sensing is needed.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
Push is 6135.9 N and pull 5890.5 N at 0.5 MPa; at 0.7 MPa push reaches 8590.3 N, with a theoretical maximum of 1251.4 kgf at 1.0 MPa. The -10 code is a 10 mm adjustment window: an external stop screw shortens the 70 mm extend stroke on site, so the usable range is 60-70 mm. It cannot lengthen the stroke past 70 mm, and the stop is not a mid-stroke lock - on air loss the piston still drifts.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits tight guards and gantries. A fixed TPU bumper at each end absorbs end-of-stroke energy. Sensing requires the optional -S magnet code; this model has no magnet fitted, so order ACEJ125X70-10BS to run CMSE / DMSE switches. FA flange, LB foot and I/Y knuckles bolt to the standard ISO 21287 face, and the 1/4" PT ports take standard fittings.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.