
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X70-30B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 70mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
A double acting ISO 21287 compact cylinder with an adjustable extend stroke, the ACEJ125X70-30B pairs a 125 mm bore with a 70 mm stroke and a male-threaded 25 mm rod. At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N, rising to 8590.3 N at 0.7 MPa, so it belongs in the heaviest force class of the ACE range. An external stop screw trims the extend stroke anywhere within the ordered 30 mm window, giving a usable range of 40-70 mm without changing the air supply.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters when a 125 mm bore must fit inside a press frame or guarding that leaves no room for a full-length body. A fixed TPU bumper at each end absorbs end-of-stroke energy, and the hard-anodized aluminium body with an S45C hard-chrome plated rod stands up to high-cycle duty. Note that the stop screw is a mechanical end stop only: on air loss the piston still drifts, so it is not a load lock.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X70-30B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 70 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Fixture clamps for large castings in automotive machining lines use the 125 mm bore to hold parts against milling and drilling loads inside tight guard space.
Bearing and bushing press stations benefit from the short body and the stop screw, which sets the exact pressing depth per part number.
If the job needs a shorter trim range, the -10 to -100 windows can be ordered instead of -30. Mount with FA flange or LB foot, add I or Y rod knuckles on the male-threaded rod, and remember the magnet is only present when the -S code is ordered; without it no CMSE / DMSE switch can be fitted.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push is 8590.3 N, and the theoretical maximum is 1251.4 kgf at 1.0 MPa. The bore is 125 mm with a 70 mm stroke trimmed by a 30 mm stop-screw window (usable 40-70 mm), a 25 mm male-threaded rod, a 1/4" PT port, operating pressure 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, and air filtered to 40 um.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so a 125 mm bore fits where a full-length cylinder cannot. Position sensing requires the optional -S magnet code; this model has no magnet, so CMSE / DMSE switches cannot be used unless you order the -S version. Mounting is via FA flange, LB foot or FTC bracket, with I and Y rod knuckles on the male thread, and the fixed TPU bumpers only decelerate the piston at each end.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.