verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC ACEJ Series · ISO 21287 Compact Cylinder

Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X70-40B

The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X70-40B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 70mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.

  • BoreØ125 mm
  • Stroke70 mm
  • Port size1/4"
  • Acting typeDouble acting, double rod, adjustable stroke
  • Rod threadM16×2.0
  • CushionFixed TPU bumper (both ends)
$208.39 $226.14Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every ACEJ125 stroke, adjustment, mounting and version on one page All ACEJ125 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X70-40B

The ACEJ125X70-40B is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 70 mm stroke by up to 40 mm, giving a usable range of 30-70 mm on site. At 0.5 MPa the 125 mm bore pushes 6135.9 N and pulls 5890.5 N, the heaviest class in the ACEJ range. The male rod thread (B code) suits external rod couplings and knuckles, and the 1/4" port feeds the large bore without starving flow.

The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so heavy clamping fits into presses and fixtures where a full-length body cannot. The hard-anodized aluminium body carries an S45C hard-chrome rod, fixed TPU bumpers absorb end-of-stroke energy, and the optional -S magnet enables CMSE / DMSE switches - without the -S code there is no magnet.

Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X70-40B Technical Specifications

ModelAirtac ACEJ125 Adjustable Compact Cylinder ACEJ125X70-40B
SeriesACEJ compact cylinder
StandardISO 21287
Bore sizeØ125 mm
Stroke70 mm
Acting typeDouble acting, double rod, adjustable stroke
Port size1/4"
Rod threadM16×2.0
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed TPU bumper (both ends)
Max standard strokeUp to 300 mm

Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.

Theoretical Output Force (Ø125mm)

PressureForce (both ways)
0.5 MPa5890 N
0.7 MPa8247 N
Max (@1.0 MPa)1201 kgf

ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).

Model Code: Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X70-40B

ACEJISO 21287 compact cylinder (adjustable-stroke).
125Bore size in mm.
×70Stroke length in mm.
-40Adjustable stroke window (mm the extend stroke can be shortened on site).
SOptional built-in magnet for CMSE / DMSE sensors (omit for no magnet).
BRod type: B = male thread; blank = female thread.

ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.

Where the Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X70-40B Is Used

compress

Small press and forming station

Delivers press-class force in a short body that saves about 50% of the mounting length of an ISO 15552 profile cylinder, fitting under low gantry frames.

forklift

Pallet and die locating

Positions dies and pallets on transfer lines; the male rod thread (B code) takes an external coupling, and the optional -S magnet feeds CMSE / DMSE switches for end-of-stroke confirmation.

Is the Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X70-40B the Right Cylinder?

If 70 mm is more stroke than the fixture needs, order a shorter stroke with the same -40 window instead of trimming it all in service. Note the stop screw is a mechanical end stop for the extend stroke, not a mid-stroke lock: on air loss the piston still drifts, so add a separate holding valve for suspended loads. Bolt FA flange or LB foot mounts to the ISO 21287 face, and order the -S code if CMSE / DMSE position sensing is planned.

AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Short stroke fits the compact body
  • ✓ Port/thread type (PT / G)
  • ✓ Add -S if you need the magnet for sensors
  • ✓ Rod type (female / male B) & mount (FA/LB/CA)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Compact body: keep the stroke short and avoid side load on the rod.
  • check Do not dismantle the threaded front/back covers.
  • check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
  • check Installation by qualified personnel per AirTAC docs.

Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X70-40B FAQ

At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push rises to 8590.3 N and pull to 8246.7 N, with a theoretical maximum of 1251.4 kgf at 1.0 MPa. The -40 code sets a 40 mm adjustment window: an external stop screw shortens the 70 mm extend stroke by up to 40 mm, so the working range is 30-70 mm. It runs double acting on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, -20 to +70 C, with a 1/4" port and 25 mm rod.

It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, S45C hard-chrome plated rod, threaded aluminium covers and fixed TPU bumpers at both ends that absorb end-of-stroke energy. Mounting brackets (FA flange, LB foot, FTC, I/Y knuckles) bolt to the standard ISO 21287 face. Position sensing requires the optional -S magnet code - without it there is no magnet and no CMSE / DMSE switch can be mounted. The stop screw trims the extend stroke only; it never locks or holds a load.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X70-40B

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for ACEJ125X70-40B and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.